How much lift have you used with a roller cam ,stud girdle and rocker arms. BBC engine. Street strip car. 3600# Very limited street use maybe 3000 miles a year.This message has been edited. Last edited by: B.C.Malibu,
Posts: 690 | Location: Bucks Co Pa | Registered: January 23, 2003
Originally posted by B.C.Malibu: How much lift have you used with a roller cam ,stud girdle and rocker arms. BBC engine. Street strip car. 3600# Very limited street use maybe 3000 miles a year.
No disrespect intended, but the application is for bracket racing and limited street driving, correct? If so, why push it? Take care. Tom Worthington
If it seems that bracket racing has gotten too expensive for you, maybe you are just doing it wrong.
Customer wants a “nitrous cam” installed while freshening up his engine. Car has run 8.60’s on a good track and the owner wants more. Presently is a Crower SS rocker and girdle. Bullet has recommended a cam close to .800 lift. At that point I’d switch to shaft rockers or a Yella Terra rocker.
Posts: 690 | Location: Bucks Co Pa | Registered: January 23, 2003
