DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Moser 9" Muscle Pak Rearend
Go
New
Find
Notify
Tools
Reply
  
Moser 9" Muscle Pak Rearend
 Login/Join
 
DRR Pro
posted
I know nothing about 9" Ford rearends & looking at a complete Moser 9" Muscle Pak rearend. This is going in our 80 Camaro, ProCharged 434 SBC weighing 2900 lbs. with driver. I'm looking at the fabricated housing, but don't know what else to get. Like aluminum or nodular iron center section. This will be discussed with Moser but wanted to hear your opinions.


1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
 
Posts: 2452 | Location: NV. | Registered: October 20, 2006Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
They could answer your questions better but I would say go with 40 spline axles, not much more money and much stronger. If you get gun drilled they are strong and pretty light to. Aluminum pumpkin is easier to work with.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3945 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by B KING:
I know nothing about 9" Ford rearends & looking at a complete Moser 9" Muscle Pak rearend. This is going in our 80 Camaro, ProCharged 434 SBC weighing 2900 lbs. with driver. I'm looking at the fabricated housing, but don't know what else to get. Like aluminum or nodular iron center section. This will be discussed with Moser but wanted to hear your opinions.


35 spline big pinion aluminum bolt through center, 40 spline axles.

It be plenty good.
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Pro
Picture of RacerVX54
posted Hide Post
You do not need 40 spine axles.. 35 is more then enough


"Just Shut Up and Race"

Brian Martin
Martin Racing
5.66 @121.55
 
Posts: 1378 | Location: Va.Beach .Va | Registered: August 03, 2005Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Minimum 35 spline, but not ruling out the 40s. I guess Moser will have the final determination along with the center section. The car will not see larger than a 30 x 10.5 slick. Thanks for the replies.


1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
 
Posts: 2452 | Location: NV. | Registered: October 20, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Moser 9" Muscle Pak Rearend

© DragRaceResults.com 2024