Holley Pro Dominator SBC Tunnel RAM

Bracket Talk

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/2697036496

October 18, 2020, 06:54 PM

mxx68

Holley Pro Dominator SBC Tunnel RAM

Holley Pro Dominator Tunnel Ram Sbc Did they make single 4500 carburetor top for this intake ?

October 21, 2020, 06:54 PM

Bad News

October 21, 2020, 08:54 PM

Bucky

I have never seen one. I made a top for mine to turn the throttle bodies 90 degrees.

October 22, 2020, 09:32 AM

69427

Maybe this guy will make you what you want.

https://417motorsports.net/pro...orts-sheet-metal-top

1.34 9.42@ 142.41 1.29 5.97 @ 114.00 @ #3251 Better in 2022
427 BBC by S&S Speed Center, AFD, Enderle MFI by Spud Miller
Trackside Products, Sepanek Racing T400, Dynamic converter, Autoweld, Santhuff, Smith Racecraft,
His real name is Richard but they call it "**** Fords Body Shop"

October 22, 2020, 09:38 AM

Bucky

quote:
Originally posted by 69427:
Maybe this guy will make you what you want.

https://417motorsports.net/pro...orts-sheet-metal-top

That's a lot nicer and functional and more expensive than what I made. Those intakes had more or less a flat top to them originally. So I made mine out of 1/2" aluminum and milled it to shape, and incorporated a leg for mounting the throttle cable. But a single is going to have poor air distribution without a tapered top like you show.

October 22, 2020, 04:28 PM

Ron C.

I ran one back in the 80's and 90's with duel 1050 doms on a 394 SBC. Made a tapered top for a single 1050 also. It would ET a little quicker with the single or run more MPH with the duels.

Fellow racer and servant of the Lord of Lords
John 14:6
"Creekside Racing Ministry"
MFI system, ProCharger Non-intercooled [6.02 @ 229 or 3.91/660' soft tune and killing power above 6K rpm]
Ron Clevenger

October 27, 2020, 04:14 PM

mxx68

Thanks on the information. going look more at Edelbrock Victor Ram Intake Manifolds 7070 an make a top for it a raised and tapered inside