ICS TITAN copper head gaskets

Bracket Talk

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/2607007086

March 29, 2018, 11:24 AM

highstrung

ICS TITAN copper head gaskets

Anybody ever use them...the ones with the integral ring

March 29, 2018, 03:05 PM

"The Bender"

Call Joe at Swanson Hydrographics and ask him........................

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.

March 29, 2018, 04:39 PM

J178RED

I have not used put found this, maybe you have already.....

http://scegaskets.com/wp_super...vs-mls-head-gaskets/

HAVE THEY CALLED US YET ? THEY HAVE!!!

April 01, 2018, 08:59 PM

BJs Wild Ride

I asked about them a couple years ago at PRI. I was told they weren't capable of sealing my setup (i.e 1600-1800 hp BBC). I was using cometc mls at the time but switched to copper and orings.

April 02, 2018, 06:52 AM

wideopen231

Copper and o-rings for years with blown alky w/48 lbs boost,12.5:1 compression at 3000 or so HP,same thing used on TF cars.

If no power adders I don't see why the integral o-ring wouldn't be good choice.

America home of free. Brought to you by 2nd amendment.

April 02, 2018, 06:20 PM

highstrung

Decided to go with cometic mls. Measured Ra with profilometer...30. Heard a few sealing problems with ics titans. Thanks!