Does anyone know the adjustment for increasing pressure with the regulator on FTI valve body? one tun equal_____ psi increase?

When last checked it was low and may be fine since found a leaking o-ring. If not would rather drop pan once and dial in than do it twice to get set.

Would have called FTI but lot of family stuff going on and forgot till few minutes ago.

Thanks. A 100 times on site never noticed the instructions link. See it is not that men do not follow instructions we just do not look for them. LOL

Again thanks.

1/2 to 3/4 turns counterclockwise is what normally gets us from 250ish to 200ish. Since you were seeing 170psi I would say do a 1/4 turn clockwise for a stock case and 3/4 turn for an aftermarket case.

Also let me know what you think of the new instructions and if they're clear enough. I recently re-wrote them.

-Dalton

Thanks Dalton. Already did 3/4 and going to check tomorrow if the rain lets up.