 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Bracket Talk Bracket Talk Forum Tech Talk - by Abruzzi Rod & Main bearing clearance?Go | New | Find | Notify | Tools | Reply | |
| Rod & Main bearing clearance? | Login/Join |
| DRR Top Comp |
  | |||
|
DRR Pro |
More famous than Stange Magic?  Andy and Rietow….. That would be good reading on DRR!!! Mikey | |||
|
DRR Sportsman |
X2 Jeremiah Hall | |||
|
DRR S/Pro |
I’ll go one better Andy, Rietow and Ed Now that would set the site on fire | |||
|
| DRR Sportsman |
I got to believe that even Ed would leave that trailer park fire alone.....LOL Jeremiah Hall | |||
|
| DRR Elite |
Miller might one up retard as the ultimate forum poser, fraud, liar that we’ve ever seen here post but it’s close. | |||
|
DRR Sportsman |
My Guy Miller blows me up on FB all the time. He's "Special" lol. | |||
|
DRR Elite |
I know from experience that excessive rod bearing clearance makes no difference other then low oil pressure at low RPM if one has a good oil pump. By mistake ran STD bearings on a .010 under crank about 60 passes and the bearings looked like new. Tore it down because of low pressure at idle. TAKE IT TO THE BANK!!!!! Later, Bill Koski | |||
|
DRR Pro |
x2 honesty is the best policy,insanity is a better deffense 1.036, 6.16@ 224 | |||
|
| DRR Top Comp |
Nobody's lying when they say you've made it your quest to be a know nothing, do nothing crate engine drag racing retard.  | |||
|
| DRR Elite |
Retard, again, I’m in great company with not only the majority of the regular posters here but with the who’s who of bracket and class racing who have professional, nationally known engine shops build their engines, not some internet hack assembling street/strip combos from the 90s for a few naive and clueless nobodies from your trailer park. It’s the year 2022 and this is bracket talk biotch! | |||
|
| DRR Trophy |
This place is more Yellow Bullet than Yellow Bullet.... | |||
|
DRR Pro |
Bearing clearance doesn't matter when you knock the oil pan off with a lane cone ...... | |||
|
| DRR Top Comp |
The clueless and naive is you retard otherwise you wouldn't be known for making it your quest to be a do nothing, know nothing crate engine drag racing retard. You try to throw the people you race with in the same do nothing, know nothing crate engine drag racing retard category, but you're the only here, pretending to be an expert. I've seen you pretend to know more than Pro Stock engine builders on the net, and you don't even own an engine stand POSER! Me, I can do it all 20 years experience.  | |||
|
| DRR Elite |
Retard, what I know is you’re a nobody, a moron, a liar, a poser who was run off of yb as a know it all who knows far less than you think you knoe. Now that said, I’ve told you shut up show up and race me and I’ll hand you your a s s and a losing time slip! | |||
|
| DRR Top Comp |
Those are all words to cover over the fact you're an inexperienced drag racing retard who pretends to be an expert, this makes you a poser, fraud and liar. A phony. | |||
|
| DRR Elite |
Retard, you’re skeered! You never accepted the many challenges at yb and you’ll never agree to race me even at Bradenton. You’re a poser, always have been always will be. | |||
|
| DRR Top Comp |
Do nothing, know nothing crate engine drag racing retard Ed is gonna huff and puff, and blow your house down. Ed, you were never even best in your neighborhood. You're a poser, a fraud and a liar. Why would anyone wanna race you?   | |||
|
| DRR Pro |
lol honesty is the best policy,insanity is a better deffense 1.036, 6.16@ 224 | |||
|
| DRR Elite |
 | |||
|
| Powered by Social Strata | Page 1 2 3 4 5 |
 | Please Wait. Your request is being processed... |
|
Bracket Talk Bracket Talk Forum Tech Talk - by Abruzzi Rod & Main bearing clearance?
 |
 |
 |
 |
