DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Draining a powerglide
Go
New
Find
Notify
Tools
Reply
  
Draining a powerglide
 Login/Join
 
DRR Trophy
posted
How do you go about removing the most fluid from a powerglide without removing it from the car?
 
Posts: 20 | Location: Pa. | Registered: August 12, 2017Reply With QuoteReport This Post
DRR / Crew
Picture of DragRaceResults
posted Hide Post
drain plug and or pan along with coolant lines. Almost impossible to get it out of the converter without removing converter.
 
Posts: 2109 | Location: Gallatin, TN - U.S.A. | Registered: October 12, 2009Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Do like Chrysler did drill a 5/16 hole near a mounting lug tap it 1/8 npt install a plug. Rotate it to bottom and drain until empty. Blow out the cooler along with its lines. All of mine are that way.
 
Posts: 92 | Location: North Carolina | Registered: April 04, 2003Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Wow, no one with the right answer yet..
Just park it a few days in a new trailer. Fluid removes itself from the trans.
64% of the time, works every time Smile
 
Posts: 97 | Location: South MS | Registered: September 07, 2015Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
The transmission doesn't drain in the trailer over a few days. A lot of torque converters will drain about half their fluid back into the transmission pan over time. but you are still leaving old fluid in the converter.
 
Posts: 92 | Location: North Carolina | Registered: April 04, 2003Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
quote:
Originally posted by WEH2:
The transmission doesn't drain in the trailer over a few days. A lot of torque converters will drain about half their fluid back into the transmission pan over time. but you are still leaving old fluid in the converter.


I wasn’t being serious, that was a joke..
On my old open trailer, Trans never leaked a drop. Got a new enclosed trailer with a nice coin floor..it starts leaking.
 
Posts: 97 | Location: South MS | Registered: September 07, 2015Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by Iforgot:
quote:
Originally posted by WEH2:
The transmission doesn't drain in the trailer over a few days. A lot of torque converters will drain about half their fluid back into the transmission pan over time. but you are still leaving old fluid in the converter.


I wasn’t being serious, that was a joke..
On my old open trailer, Trans never leaked a drop. Got a new enclosed trailer with a nice coin floor..it starts leaking.


For what it’s worth, I thought it was funny.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2945 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post



DRR Sportsman
Picture of johnracer
posted Hide Post
So did I
quote:
Originally posted by CURTIS REED:
quote:
Originally posted by Iforgot:
quote:
Originally posted by WEH2:
The transmission doesn't drain in the trailer over a few days. A lot of torque converters will drain about half their fluid back into the transmission pan over time. but you are still leaving old fluid in the converter.


I wasn’t being serious, that was a joke..
On my old open trailer, Trans never leaked a drop. Got a new enclosed trailer with a nice coin floor..it starts leaking.


For what it’s worth, I thought it was funny.
 
Posts: 51 | Location: Rifle Colorado | Registered: June 06, 2010Reply With QuoteReport This Post
DRR Sportsman
Picture of FTI
posted Hide Post
quote:
Originally posted by WEH2:
Do like Chrysler did drill a 5/16 hole near a mounting lug tap it 1/8 npt install a plug. Rotate it to bottom and drain until empty. Blow out the cooler along with its lines. All of mine are that way.


We recommend against drilling the converter. There is no sure fire way to keep all the metal shavings from the inside of the converter.

@Iforgot that's a good one!

-Dalton


FTI Performance
Competition Converters and Racing Transmissions
"Some call it cheating, we call it the competitive edge."
www.FTIPerformance.com
info@ftiperformance.com





 
Posts: 163 | Location: Deland, FL | Registered: August 31, 2009Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Does FTI recommend changing fluid every so many runs. I put about 50 on my fluid and change it. Why do the converter manufacturers not put a drain in the converter?
 
Posts: 92 | Location: North Carolina | Registered: April 04, 2003Reply With QuoteReport This Post
DRR Pro
Picture of Rymo
posted Hide Post
Good god!!! 50 runs? Why? I bet most are closer to 500 before changing and some filter it and put it back in, if it aint burnt its fine. Waste of money imo but ill let an expert chime in


Ryan Fasano

2014 Byron Overall Track Champion
Byron's actual elevation is 730' because that matters more than winning anything ever....
 
Posts: 535 | Location: wisconsin | Registered: January 08, 2008Reply With QuoteReport This Post
DRR Pro
posted Hide Post
I use Dexron 6 in my th400 and never change it. When the trans is serviced (1000 runs) it gets changed.

I would like to try THIS BRAND next time.
 
Posts: 2462 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
DRR Pro
Picture of Eman
posted Hide Post
markemark, what brand Dexron VI are you using?
 
Posts: 1462 | Location: E TN | Registered: February 13, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Draining a powerglide

© DragRaceResults.com 2024