DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Anyone rebuilt a stock steering gear box?
Go
New
Find
Notify
Tools
Reply
  
Anyone rebuilt a stock steering gear box?
 Login/Join
 
DRR Pro
Picture of Footloose
posted
Looking at trying to do my 1st one.
 
Posts: 1922 | Location: in a van down buy the river | Registered: September 07, 2002Reply With QuoteReport This Post
DRR Pro
Picture of Alaskaracer
posted Hide Post
I have, but it was years ago....they are a pain in the you know what......especially the recirculating balls....


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1541 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of TD3550
posted Hide Post
Why sure back in the 70's. Common back then was the sector shaft along with the lower bushing/bearings and seal. Other than that it was filed under the S** Can Dept. Sure brings back the Wrench throwing moments with the ball bearings.
Was removing the balls and low and behold dropped one of the balls and "Bingo" rolled off the bench and rolled right into the sewer next to the workbench. lol

This message has been edited. Last edited by: TD3550,
 
Posts: 1421 | Location: Under a Truck | Registered: August 23, 2013Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Not sure if this helps, but if it’s a power box both seals can be repaired without it being disassembled.
 
Posts: 102 | Location: Work | Registered: April 12, 2010Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Probably can’t do any worse thenA1 Carbone does
 
Posts: 417 | Location: Natick MA | Registered: November 15, 2017Reply With QuoteReport This Post
DRR Pro
Picture of HS professor
posted Hide Post
https://redheadsteeringgears.com/


I've had a few done here over the years with good results.
Maybe they can hook you up with the parts, can't be that hard to do it yourself ??
 
Posts: 1422 | Location: Monroe twp nj | Registered: December 05, 2005Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Anyone rebuilt a stock steering gear box?

© DragRaceResults.com 2024