 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Go  | New | Find | Notify | Tools | Reply | |
| Vacuum pump bracket | Login/Join |
DRR Trophy |
Looking to see if theres a manufacturer that makes a vacuum pump bracket that uses the front 2 lower holes on a bbc.. thanks In greed we trust...So where's my money at? | ||
|
DRR Sportsman |
(209) 296-3793 ask Bill at GZ 2012 West Coast Pro Gas E/Gas Champion | |||
|
| DRR S/Pro |
I was gonna try my moroso one in those hopes but radiator hose is in the way. | |||
|
DRR Sportsman |
Our bracket isn't specifically made for that location but you should be able to make it work by drilling a hole or two in it, as long as the chassis, Etc, isn't in the way. Bill Huntington GZMOTORSPORTS.com gzmotorsports.com/video/PRI2010.wmv | |||
|
DRR Top Comp |
I have a small block but I think the three bolt hole locations are standard between big block and small block? I used the BBC mounting plate on my SBC and drilled the third hole to make it stronger. When I had the Hoosier tires it would tire shake so bad it was tearing everything up so I made it stronger. I think all of the brackets should use three holes much stronger and eliminates that vibration. https://postimg.cc/gallery/np3zpruo/ "Dunning-Kruger Effect" -a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge. Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue. 4X NE2 CHAMPION. 2020 TDRA NE2 Champion | |||
|
| DRR S/Pro |
I checked my bracket today and it will line up with those holes but the holes are for 3/8 bolts not 7/16 which those holes you are talking about are tapped to. You would have to enlarge the slot which would be hard to do with typical home tools. | |||
|
| DRR Trophy |
Which bracket do you have? I can alter one at work in the bridgeport.. In greed we trust...So where's my money at? | |||
|
| DRR S/Pro |
Moroso 63917 | |||
|
| DRR S/Pro |
It could cause problems with radiator hose if you are running regular sized hose. | |||
|
| DRR Trophy |
I want to mount on the drivers side. In greed we trust...So where's my money at? | |||
|
| DRR S/Pro |
Ok. I had alternator and crank trigger mounted on that side. | |||
|
DRR Trophy |
Could anyone send me pictures of their setups for mounting vacuum pump not on the head? New engine going in my car does not have the holes drilled in the head for mounting anything to it... I can drill my front motor plate, would just prefer not to. Nick Craig 1971 Camaro Split Bumper 376ci LS3 | |||
|
| DRR S/Pro |
I am drilling motor plate so I can’t help you out Nick. | |||
|
| DRR Trophy |
That'll be my last resort if I can't come up with any better ideas.. Gonna do the same thing with my coil, have to get a different bracket that only uses two mounting points to hold the HVC-II coil and mount it on the back of mid plate. Nick Craig 1971 Camaro Split Bumper 376ci LS3 | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
 |
 |
 |
 |
