DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    What’s a good camshaft for a 622
Go
New
Find
Notify
Tools
Reply
  
What’s a good camshaft for a 622
 Login/Join
 
DRR Trophy
posted
I have a 622 big chief motor. What size of lift and duration is best for this type of motor. I am thinking of changing the camshaft. I want to hear what folks say before I change it. The one in it might be right but would like see.
 
Posts: 109 | Location: Albuquerque | Registered: September 15, 2008Reply With QuoteReport This Post
DRR Pro
Picture of Alaskaracer
posted Hide Post
You need to be a lot more specific. More details. Compression, carb size, intake, headers, rpm range, nitrous, force fed or no.....type of car, weight, gearing, trans, converter...

Asking for a cam for a 622 is like asking what your car will run and not telling us what it is.....


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1561 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post
DRR Pro
Picture of T/D6591
posted Hide Post
What cylinder heads?


 
Posts: 1708 | Location: Portland,Oregon | Registered: January 18, 2009Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Have you talked to Reher Morrison? They have built a lot of those.
 
Posts: 411 | Location: Highland,Ca | Registered: December 06, 2002Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
who built the motor? I would ask an engine expert after giving details of my combination instead of the guys on here. Reher Morrison or PAR would be my suggestions on who to ask
 
Posts: 883 | Location: Georgia | Registered: May 09, 2008Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
I would call the major cam companies especially Bullet and ask them a bunch of questions and really pay attention to the questions they ask you about your combination. Tell them what you want to achieve and best cam to get there.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4348 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of BD104X
posted Hide Post
I wear a 6 7/8 hat... what size shoes should I buy?
Sorry, couldn’t resist.


Billy Duhs - BD104X@gmail.com
 
Posts: 660 | Location: New Jersey | Registered: February 26, 2000Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
I have had very good luck with Bullet cams. As was stated above make sure you are prepared to give them as much information about your combination as possible. I also found that they were great to deal with on the phone as well.


B.J. Masiello
 
Posts: 250 | Location: Connecticut | Registered: November 27, 2007Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I will give bullet a call. Thanks for the input.
 
Posts: 109 | Location: Albuquerque | Registered: September 15, 2008Reply With QuoteReport This Post
DRR Pro
Picture of 00 DEAD ON
posted Hide Post
If you are running alky call John Kyle at APD for your cam


Brian Mollison
2013 American Dragster
2020 Sumerduck Dragway VA Top ET Champion
2017 Sumerduck Top ET & SSS Track Champion
2017 MAC Top ET Track Champion
2009 Sumerduck Dragway Va Top ET & IHRA SSS Track Champion
2008 IHRA Division 1 Top ET Bracket Final Runner-up
2007 Colonial Beach Dragway Top ET Track Champion
 
Posts: 1033 | Location: Stafford, Virginia | Registered: October 03, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    What’s a good camshaft for a 622

© DragRaceResults.com 2024