DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    combustion chamber volume and alky
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
combustion chamber volume and alky
 Login/Join
 
DRR Pro
posted Hide Post
quote:
Originally posted by Strange Magic:


quote:
Yes James did a 12* profiler engine and it ran very well. Keep in mind though that SSRE and their engine builders had some influence in it also.


Throw nitro into anything and it will run pretty darn good.



So you are implying it was ran on M5 and/or he used some percentage of nitro methane? WRONG, that would be FAKE NEWS! Nitro and M5 are not even allowed in the class he was racing it in. It was ran on VP Racing Fuels M1 ONLY and towards the end he also used a small shot of Nitrous via a NX Express system enriched with more of the plain ol' M1. Both worked and ran well which couldn't possibly be true if a person believed everything they read on the internet. Roll Eyes

Scott
 
Posts: 1838 | Location: Illinois | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by 358T:
quote:
Originally posted by Strange Magic:


quote:
Yes James did a 12* profiler engine and it ran very well. Keep in mind though that SSRE and their engine builders had some influence in it also.



Throw nitro into anything and it will run pretty darn good.



So you are implying it was ran on M5 and/or he used some percentage of nitro methane? WRONG, that would be FAKE NEWS! Nitro and M5 are not even allowed in the class he was racing it in. It was ran on VP Racing Fuels M1 ONLY and towards the end he also used a small shot of Nitrous via a NX Express system enriched with more of the plain ol' M1. Both worked and ran well which couldn't possibly be true if a person believed everything they read on the internet. Roll Eyes

Scott


Scott

Not even worth the time it took you to reply never mind read his posts... you never get that time back! Big Grin
 
Posts: 2149 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Are "YOU" implying that he never, ever ran M5?

Yes or no?

quote:
Both worked and ran well


Did he switch to blown injected?


strangemagicperformance.com
oldsperformanceproducts.com




WD dealer for just about all your performance needs.
 
Posts: 1604 | Location: Suffern, NY | Registered: November 03, 2001Reply With QuoteReport This Post
DRR Sportsman
Picture of 329L
posted Hide Post
quote:
Originally posted by Dave Koehler:
That was probably said in the 60s or 70s. Perhaps even earlier. Smokey is a messiah to many of us but he was wrong.
That reads like something I would hear from a gas carb guy that had never run alky.
Firesuit is on. Smile

FWIW I think a maximum of 14:1 on alky works the best all around.
Above that the window gets real narrow with very little gain if any other than dyno bragging rights.
I assume most realize that those dyno numbers seldom happen outside of the cell.

Honestly, with the big cubes these days most make more HP by mistake than by design.
It would seem chasing diesel compression ratios makes little sense.

Which brings up a what if question.
Would someone "soften" the chambers versus a smaller dome and create a better alky happy scenario??



I personally believe soften chambers would help an alky engine, if the compression ration was 15+ to 1.


Jeremiah Hall
 
Posts: 705 | Location: Evansville, IN | Registered: February 24, 2010Reply With QuoteReport This Post
DRR Sportsman
Picture of 329L
posted Hide Post
M5 is NOT even close to the same thing as nitro. I would argue that M5 is not even as good as q16.


Jeremiah Hall
 
Posts: 705 | Location: Evansville, IN | Registered: February 24, 2010Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    combustion chamber volume and alky

© DragRaceResults.com 2024