Always finding upside to crappy situation. Well alomost always.

Had a issue with car last weekend always [pulling hard right. Had few say rearend out, So knowing ni way in hell outr siunce measured 100 time during build, I checked it anyway. fzound out was right.

Two upsides, 1 removed doubt of rearend location.

2 GAVE me good reason to intalln new shorter lighter sheel stud along with aluminum nuts. Not alot of weight but parts been on shelf for few months now. Plus spending that much cash (chouldn't but can not help myself) for lighter parts and using them might be a sin.

So there is my upside. Now if get narrower wheels and tires with correct offset I can remove good amount off. Running 14x15 wheels that bought off member at grewt dea; but had to add spacers for offset. Lightest spacer made still 12 oz each. Remiocve 2" on each wheel and tire combo has to good amount too. Oops more cash so maybe the down side?

stay with it, get it right then leave it alone and go racing.
Are the axles OK?

check rollout