We are updating our ProCharger “Slide Slinger” F3-R-112 from a 14mm 2.6” to a 3” blower belt to better handle the high 8000+ RPM loads. The original 2.6” belt is just over 75” [1905mm].

I have been looking on the internet for a 75” to 76” 14mm x 3” belt to no avail. I have only been able to find several sources for a 74.4” 14mm x 3” belt.

Can anyone out there point me to a source for the wider and longer belt?

Thanks… DG

This message has been edited. Last edited by: David Gerard, August 12, 2024 12:00 AM

Dave have you checked with Good Vibrations? They have a large supply of belts of various sizes as well as Blower drive service.

Yes, they are near me and their inventory doesn't have any long belts.

Good people!

DG

Try Forced Induction Supercharger Technology (F.I.S.T.) at 1070 South Cypress St. Unit K in La Habra, Ca. 90631.

Andy Wilfong at (562) 665-7796.

Bob

This message has been edited. Last edited by: RPROGAS, August 14, 2024 08:29 AM

He sent me to Good Vibrations!

Been there...
Done that!

DG

David, did you ever find your belt?

Thanks, everyone for all of your suggestions.

We were able to change the Adjustment pully to a bigger diameter and use the "standard" 74.4" Kevlar 3" belt.

DG