Bracket Talk
Let's Talk Bumps-Any Bumps! Going Strong Since Jan. 2013
January 07, 2013, 08:16 PM
Ron C.Let's Talk Bumps-Any Bumps! Going Strong Since Jan. 2013
quote:
Originally posted by Paul S/Q:
Ron , not planning on running it down the track... I figure if I hit all 6 systems with the release of the transbrake button, the explosion will propel the car to about a 6.30 pass or so ....
Yeah....might need three parachutes on that deal. I'd suggest a crewman picking up the time slip. You may be a bit busy putting the flames out on your fire suit
Blessings......Ron
Fellow racer and servant of the Lord of Lords
John 14:6
"Creekside Racing Ministry"
MFI system, ProCharger Non-intercooled [6.02 @ 229 or 3.91/660' soft tune and killing power above 6K rpm]
Ron Clevenger
January 07, 2013, 08:19 PM
Ron C.quote:
Originally posted by Bednar1320:
I think I'll just eat at Taco Bell for a couple of days prior to a race
Save the paper rapers and napkins, they'll come in handy
Blessings....Ron
Fellow racer and servant of the Lord of Lords
John 14:6
"Creekside Racing Ministry"
MFI system, ProCharger Non-intercooled [6.02 @ 229 or 3.91/660' soft tune and killing power above 6K rpm]
Ron Clevenger
January 08, 2013, 10:48 PM
Will Harrisonquote:
Originally posted by T/D6591:
Damn i knew i forgot something,i was going to change the rear axle bearings to ceramic over the winter. I hope i can still qualify.
Who is this Tubie that you speak of?
I can help you out with those bearings before Phoenix
lol
.991 60'
4.36 @ 159 so far.....
6.86 @ 198 trying for more......
533" single carb
235" Harrison 4-link
January 08, 2013, 10:52 PM
Will HarrisonMan I been missing out! I forgot this was down here! Lol
.991 60'
4.36 @ 159 so far.....
6.86 @ 198 trying for more......
533" single carb
235" Harrison 4-link
January 08, 2013, 10:57 PM
"The Bender"Gotta do something to keep this thread going
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 09, 2013, 12:16 PM
Ron C.You could elaborate on your "big changes coming".
Blessings........Ron
Fellow racer and servant of the Lord of Lords
John 14:6
"Creekside Racing Ministry"
MFI system, ProCharger Non-intercooled [6.02 @ 229 or 3.91/660' soft tune and killing power above 6K rpm]
Ron Clevenger
January 09, 2013, 12:49 PM
"The Bender"You're right, I could
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 09, 2013, 01:01 PM
Ron C.quote:
Originally posted by Bednar1320:
You're right, I could
What are you saying? You have not figured out what they are yet!!
Well, I'm changing fuels on mine. Got tired of paying VP $1000 for a drum of C-16 blower gas. Feel like they stick a gun in my ribs.
So I'm changing pistons/rings/pins/buttons/camshaft and redoing the fuel system. That'll really $how them
Blessings......Ron
Fellow racer and servant of the Lord of Lords
John 14:6
"Creekside Racing Ministry"
MFI system, ProCharger Non-intercooled [6.02 @ 229 or 3.91/660' soft tune and killing power above 6K rpm]
Ron Clevenger
January 10, 2013, 05:46 PM
Paul S/Qjust remembered I need to call Will and get some ceramic bearings for my wheelie bar wheel...outa be worth .05 and 4 mph for sure ...
January 11, 2013, 12:07 AM
T/D6591Will,if I buy the ceramic axle bearings then I won't have enough money left for diesel to get to Phoenix.
January 11, 2013, 05:47 PM
Will HarrisonPaul do you have a single wheel wheelie bar or double? Double would gain more then that....lol
Moe, we do lay away... Kinda like K-Mart lol
.991 60'
4.36 @ 159 so far.....
6.86 @ 198 trying for more......
533" single carb
235" Harrison 4-link
January 12, 2013, 09:50 AM
top comp
got every thing we need for div.3 and have a whole bunch for sale
you know ,like another car,engine,trans and more(call KOFFELS PLACE in Huron Ohio)
January 12, 2013, 08:45 PM
Paul S/QWill, just a single wheel , But I can add a second wheel , if it will pick us up to have that extra bearing in there ...what about a ceramic bearing in the wind meter on my weather station, so I can get the readings before anyone else does ...??
January 14, 2013, 04:46 PM
Will HarrisonPaul, your wind meter most likely already has a ceramic bearing in it, so I don't think I can help you there... On the second wheel, adding a second wheel would create an added amount of wind resistance equal to the gain you would see from the bearing, so it'd be a wash... Lol
.991 60'
4.36 @ 159 so far.....
6.86 @ 198 trying for more......
533" single carb
235" Harrison 4-link
January 14, 2013, 05:22 PM
Paul S/Qwell how about bearings for the 4 wheeler wheels , so I can get the car into the lanes faster ???
Man , here in Div3 a guys gotta have all the help he can get ..LOL
January 15, 2013, 10:16 PM
"The Bender"
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 22, 2013, 07:35 PM
"The Bender"
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 23, 2013, 02:13 AM
T/D6591 man it's quite down here.
January 24, 2013, 08:32 PM
"The Bender"Chirp, chirp
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 27, 2013, 12:54 PM
T/D6591quote:
Originally posted by Bednar1320:
Chirp, chirp
. Crick,Crick!