DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Bullet Cam curiosity
Go
New
Find
Notify
Tools
Reply
  
Bullet Cam curiosity
 Login/Join
 
DRR Pro
posted
If you are running a Bullet cam, who is your go-to person at Bullet?


Larry Woodfin



 
Posts: 1834 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Tim Goolsby
 
Posts: 97 | Location: Atlanta “Land Soft--Kill Quiet” | Registered: January 21, 2021Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
I think Kurt was the guy I talked to?

Several years ago I was looking for cams and I called all the major cam companies. One literally asked me "Big block or small block Dirt or Drag? Here is cam you need"

Bullet asked me a whole bunch of questions and what I wanted and they got me a good cam.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4016 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Kirk

Kirk and Richard worked on the cam in my Nova a week, before committing.

Pretty damn good one.


This message has been edited. Last edited by: Mike Rietow,
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Certainly do not forget about Mike Jones of Jones Cams in NC. He has made a few for me and has always been spot on. His website has a questionnaire to fill out that is very in-depth.
 
Posts: 97 | Location: Atlanta “Land Soft--Kill Quiet” | Registered: January 21, 2021Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
Tim @ Bullet, very smart dude.


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1666 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
I have used Jones (good cam but slow to produce), Bullet (missed the lifter spacing), comp (cam was OK but lifters sucked), and now use LSM Does about 10,000 cams a year. Has cores on the shelf).
To be honest LSM made the most power, and had my first cam in a week, last one took 3 weeks but he warned be he was running behind.

None have been good to communicate via email which is my preferred method.

Dave

This message has been edited. Last edited by: David Covey,


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3309 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post



DRR Pro
Picture of rusty
posted Hide Post
tim


honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224

 
Posts: 1415 | Location: texas | Registered: February 17, 2006Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
I used John Partridge, he is supposed to be the mopar guy.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3309 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
The last several motors were from them. Bought a backup Shaffiroff motor and that too had a bullet cam. Zero complaints.



Configuration: 3350#, 582 C.I.,

60 - 1.24
1/8 - 5.53@ 126MPH
1/4 - 8.73@ 159MPH



3700#+210lb driver, FULL interior, through mufflers, 10.5 tire.
60'-1.333 (IN 4000ft DA! Joisy Math excluded; 1.25sec using JOISY MATH.) Wink
1/4 - 9.60@144MPH

 
Posts: 1442 | Location: St Marys | Registered: January 12, 2004Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
I always deal with Mark Chacon, very knowledgeable and friendly.

Bob
 
Posts: 3083 | Location: Lakeside, Ca | Registered: February 15, 2003Reply With QuoteReport This Post
DRR Pro
Picture of Roger McGinnis
posted Hide Post
quote:
Originally posted by David Covey:
I have used Jones (good cam but slow to produce), Bullet (missed the lifter spacing), comp (cam was OK but lifters sucked), and now use LSM Does about 10,000 cams a year. Has cores on the shelf).
To be honest LSM made the most power, and had my first cam in a week, last one took 3 weeks but he warned be he was running behind.

None have been good to communicate via email which is my preferred method.

Dave


x2



ΜΟΛΩΝ ΛΑΒΕ
 
Posts: 559 | Location: Republic of Texas | Registered: January 16, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Bullet Cam curiosity

© DragRaceResults.com 2024