If you are running a Bullet cam, who is your go-to person at Bullet?
Larry Woodfin
July 04, 2021, 10:08 PM
TD1964
Tim Goolsby
July 04, 2021, 10:57 PM
Curly1
I think Kurt was the guy I talked to?
Several years ago I was looking for cams and I called all the major cam companies. One literally asked me "Big block or small block Dirt or Drag? Here is cam you need"
Bullet asked me a whole bunch of questions and what I wanted and they got me a good cam.
https://postimg.cc/gallery/np3zpruo/ "Dunning-Kruger Effect" -a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.
Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.
4X NE2 CHAMPION. 2020 TDRA NE2 Champion
July 04, 2021, 11:11 PM
Mike Rietow
Kirk
Kirk and Richard worked on the cam in my Nova a week, before committing.
Pretty damn good one.
This message has been edited. Last edited by: Mike Rietow,
July 05, 2021, 08:01 AM
TD1964
Certainly do not forget about Mike Jones of Jones Cams in NC. He has made a few for me and has always been spot on. His website has a questionnaire to fill out that is very in-depth.
July 05, 2021, 11:39 AM
Goob
Tim @ Bullet, very smart dude.
"Despite the high cost of living, it remains popular." Dave Cook N375
July 05, 2021, 01:03 PM
David Covey
I have used Jones (good cam but slow to produce), Bullet (missed the lifter spacing), comp (cam was OK but lifters sucked), and now use LSM Does about 10,000 cams a year. Has cores on the shelf). To be honest LSM made the most power, and had my first cam in a week, last one took 3 weeks but he warned be he was running behind.
None have been good to communicate via email which is my preferred method.
DaveThis message has been edited. Last edited by: David Covey,
"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
July 05, 2021, 07:58 PM
rusty
tim
honesty is the best policy,insanity is a better deffense 1.036, 6.16@ 224
July 06, 2021, 10:09 AM
David Covey
I used John Partridge, he is supposed to be the mopar guy.
Dave
"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
July 06, 2021, 11:58 AM
ski_dwn_it
The last several motors were from them. Bought a backup Shaffiroff motor and that too had a bullet cam. Zero complaints.
3700#+210lb driver, FULL interior, through mufflers, 10.5 tire. 60'-1.333 (IN 4000ft DA! Joisy Math excluded; 1.25sec using JOISY MATH.) 1/4 - 9.60@144MPH
July 06, 2021, 08:35 PM
RPROGAS
I always deal with Mark Chacon, very knowledgeable and friendly.
Bob
July 10, 2021, 09:40 AM
Roger McGinnis
quote:
Originally posted by David Covey: I have used Jones (good cam but slow to produce), Bullet (missed the lifter spacing), comp (cam was OK but lifters sucked), and now use LSM Does about 10,000 cams a year. Has cores on the shelf). To be honest LSM made the most power, and had my first cam in a week, last one took 3 weeks but he warned be he was running behind.
None have been good to communicate via email which is my preferred method.
This message has been edited. Last edited by: Mike Rietow, 
