Cerakote

December 21, 2024, 10:07 PM

BP758

Cerakote

Anyone use Cerakote products?
I just stepped my headers and I would like to spray a set.

December 22, 2024, 12:14 PM

David Covey

quote:
Originally posted by BP758:
Anyone use Cerakote products?
I just stepped my headers and I would like to spray a set.

So far I have coated my blower and intake , also pistons for both engines top coat and skirts, plus several sets for other people.

I like it, it works really well, easy to put on. Only thing I don't like is sand blasting everything. Pistons get masked off three times depending if you coat both top and skirts.
You have to bake most products so you will need an oven.
I also use a cheap Harbor Freight touch up gun.

Dave

"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell

December 22, 2024, 06:45 PM

BP758

Thank you Dave.
Merry Christmas.

December 23, 2024, 08:45 AM

DragRaceResults

It's tough as nails if applied correctly. I've had some headers done and they were not tough and it's really hard to strip off.

My suggestion is making sure your applicator knows what they're doing.

We have a guy who does guns for manufacturers all over the world doing some test products for us now. He also does carburetor parts for a leading manufacturer. He's in our town and we just stumbled across him by the carb peoples recommendation.

Excited to see the options this offers us.

December 23, 2024, 09:36 AM

CURTIS REED

I think Vern, (Cashflow) did some of his firearms.

____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner

December 23, 2024, 10:13 AM

BP758

quote:
Originally posted by DragRaceResults:
It's tough as nails if applied correctly. I've had some headers done and they were not tough and it's really hard to strip off.

My suggestion is making sure your applicator knows what they're doing.

We have a guy who does guns for manufacturers all over the world doing some test products for us now. He also does carburetor parts for a leading manufacturer. He's in our town and we just stumbled across him by the carb peoples recommendation.

Excited to see the options this offers us.

Thanks Scott. We’ll see. Have acsess to a big oven here.

December 23, 2024, 10:14 AM

BP758

quote:
Originally posted by CURTIS REED:
I think Vern, (Cashflow) did some of his firearms.

I’ll text Vern thanks Cutis.

December 23, 2024, 10:18 AM

BP758

After lots of research I’m coating the pan and lower block too. Possibly the heads also. Oil control.

December 23, 2024, 11:55 AM

David Covey

quote:
Originally posted by BP758:
Thank you Dave.
Merry Christmas.

You are welcome.

Have a good one yourself.

Dave

"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell

December 23, 2024, 02:36 PM

CAD

I'd pay close attention to the mfr requirements for texture finish needed prior to coating, also. My understanding is that it is not a sandblast and coat process, as the media is critical, also.

Especially on anything that is going to be coated on the inside of an engine.

My headers were improperly done, and I have to get them redone over the winter.

Clark

December 24, 2024, 01:53 PM

BP758

quote:
Originally posted by CAD:
I'd pay close attention to the mfr requirements for texture finish needed prior to coating, also. My understanding is that it is not a sandblast and coat process, as the media is critical, also.

Especially on anything that is going to be coated on the inside of an engine.

My headers were improperly done, and I have to get them redone over the winter.

Clark

Thanks Clark, I bought the aluminum oxide they want it blasted with.