DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    CNC master cylinders
Go
New
Find
Notify
Tools
Reply
  
CNC master cylinders
 Login/Join
 
DLR
DRR Sportsman
Picture of DLR
posted
CNC is out of business most of you know. I've searched endless days looking for either a complete 3/4" master cylinder or a kit. This is the style used in a twin configuration.
 
Posts: 477 | Location: BENTON HARBOR, MI | Registered: August 29, 2007Reply With QuoteReport This Post
Mike Nitzsche
DRR Sportsman
Picture of Mike Nitzsche
posted Hide Post
I had a CNC pedal on my Nova and put Wilwood masters on it. As far as I know its just two dragster single masters.
 
Posts: 1364 | Location: Lansing,Mi | Registered: March 20, 2007Reply With QuoteReport This Post
DLR
DRR Sportsman
Picture of DLR
posted Hide Post
someone certainly has to have a kit out there???
 
Posts: 477 | Location: BENTON HARBOR, MI | Registered: August 29, 2007Reply With QuoteReport This Post
Goob
DRR Pro
Picture of Goob
posted Hide Post
quote:
Originally posted by DLR:
someone certainly has to have a kit out there???


Any good NAPA store should be able to come up with a kit. It's a rubber cup. Just has to fit the bore. ?


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1927 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    CNC master cylinders

© DragRaceResults.com 2025