SBC roller cam
DRR Trophy
Looking to make a footbrake car to play around with. Have a 97 350 roller cam motor. Was looking for some help with cam recommendations.
Aluminum heads or vortec heads, dual plane intake, 1 5/8 headers, th400 28-3200? Converter, gm 8.5 with 4.10. car is a 76 Grand Prix
Posts: 2 | Location: Lebanon tn | Registered: October 26, 2020Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I've had good luck with comp cams mutha thumper hydraulic roller.
Part # 8-601-8 . It's a stepped nose to be used the factory retainer plate , its 235,249 at .050 .522 , .509 lift. 107 lobe separation.
My car has 062 vortec heads, guides machined down for retainer clearance and spring seats cut for a factory ZZ4 valve spring. Edelbrock 2116 intake, quickfuel 750.
I used a Hughes 4000 10inch converter and 4.10 gears in a 02 camaro. It runs 7.50s and 60s depending on the weather.
Posts: 8 | Location: nashville,TN | Registered: November 08, 2014Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
GM hot cam
Posts: 679 | Location: Bucks Co Pa | Registered: January 23, 2003Reply With QuoteReport This Post
  Powered by Social Strata  

© DragRaceResults.com 2023