Go
New
Find
Notify
Tools
Reply
  
10.5 x 31w 15
 Login/Join
 
DRR Trophy
Picture of eric doukas
posted
Anyone running a 10.5 x 31w 15 slick on a 14 inch rim they call for a 12 inch rim ??
 
Posts: 53 | Location: fallon nv | Registered: December 02, 2005Reply With QuoteReport This Post
DRR Trophy
Picture of eric doukas
posted Hide Post
Ok, is anyone running those 10.5 x 31w 15 ,on 10inch rims , best brand , running PSI , Tubes ??? rims are already drilled for screws
 
Posts: 53 | Location: fallon nv | Registered: December 02, 2005Reply With QuoteReport This Post
DRR S/Pro
Picture of Eman
posted Hide Post
I've run 29.5x10.5W on a 10" wheel tubeless at 12.5-13.5psi. I've had wheels that were drilled but ran them without screws, didn't need them. I have had tires move on the rim if I mounted using soap but didn't clean it off after mounting before insflating. Now I clean rim and bead and use hairspray before inflating and have no slippage.
 
Posts: 1585 | Location: E TN | Registered: February 13, 2009Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I can’t help as far as running on a different size rim but as far as brand goes I like my Phoenix slicks PH101. I have never had problems with Phoenix slicks and another raced asked me about and switched to them as well and said he picked up on the 60’. But he was going from a different size so that may have been a factor. I also run tubes in mine.


"It better not rain this weekend"
 
Posts: 10 | Location: Chicago | Registered: December 29, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024