June 03, 2022, 10:40 AM
Mike RietowNew Combo 3.875 x 4.185 23 degree sbc 427
Who else Ed? Not you, not with your own two hands.Who else?
quote:Originally posted by 1320racer:quote:Originally posted by TonyB6255:
Easy to prove to Ed, myself and pretty much everyone else here. Load your shytbox up and take it to the next big race that is streamed live. Then we can all see how fast your shytbox really is.
But you will deflect ans spin some BS again then post up piece of a faded time slip that we've seen a 100 times as proof of your BS.
Tony and he don't have to leave his state, no mind only has to drive less than 30 miles to Bradenton Dragway. Since he already sat out the SFG Season Kick off there back in March as he does every year, he's got plenty of time to tune his cutup shytbox to be ready for the SFG Christmas Bracket Bash 12/14-17 BUT he got nothing but excuses as to why he won't race there and NEVER competes at any of the BIG $ Bracket races there every year nor ANY BIG $ Bracket Race ANYWHERE!!!
quote:Originally posted by Mike Rietow:quote:Originally posted by 1320racer:
Enough already with your claims and pieces of time slips. Post the full time slip with a 9.59 on it and the corresponding MPH for that ET or STFU with your bullshyt and banjo boy can do the same.
That's where you're at, you got nothing but hot air.
I like how you invert the situation though, with nothing to evidence anything you claim.
Even though the 9.72 you claim as fastest, is a tenth or two slow, in comparison to the evidence we already have on the table.
This message has been edited. Last edited by: Mike Rietow, 
Mikey, Ed is telling you that your cutup shyt box with its nothing special sbc ain’t running a 5 second et without a hose! Now prove me wrong, post a full time slip with ALL the incrementals, your car # and the date, track and time.
quote:Originally posted by Mike Rietow:
Ed will find more excuses for the 5 second Nova factory condition n/a 23 degree sbc 3200 lbs.
So the real question for Ed and his ilk (haters) is.... who else in drag racing could accomplish this with their own two hands??
Engine
transmission
ring & pinion.
Not Ed, unless he paid me to do it for him.
Who Else?
quote:Originally posted by 1320racer:
quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:
Ed will find more excuses for the 5 second Nova factory condition n/a 23 degree sbc 3200 lbs.
So the real question for Ed and his ilk (haters) is.... who else in drag racing could accomplish this with their own two hands??
Engine
transmission
ring & pinion.
Not Ed, unless he paid me to do it for him.
Who Else?
Kinda like YOU making excuses so you don't have to admit your car isn't that fast????
Mike....no one on here cares that you ASSEMBLED your motor....you haven't built anything
This message has been edited. Last edited by: Mike Rietow, 
quote:Originally posted by Mike Rietow:quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:
Ed will find more excuses for the 5 second Nova factory condition n/a 23 degree sbc 3200 lbs.
So the real question for Ed and his ilk (haters) is.... who else in drag racing could accomplish this with their own two hands??
Engine
transmission
ring & pinion.
Not Ed, unless he paid me to do it for him.
Who Else?
Kinda like YOU making excuses so you don't have to admit your car isn't that fast????
Mike....no one on here cares that you ASSEMBLED your motor....you haven't built anything
Show me one like it in the 5's n/a 3200 lbs 23 degree sbc.
You can't.
A big cubic inch LS Copo Camaro would be a decent heads up race, if you can afford one.
quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:
Ed will find more excuses for the 5 second Nova factory condition n/a 23 degree sbc 3200 lbs.
So the real question for Ed and his ilk (haters) is.... who else in drag racing could accomplish this with their own two hands??
Engine
transmission
ring & pinion.
Not Ed, unless he paid me to do it for him.
Who Else?
Kinda like YOU making excuses so you don't have to admit your car isn't that fast????
Mike....no one on here cares that you ASSEMBLED your motor....you haven't built anything
Show me one like it in the 5's n/a 3200 lbs 23 degree sbc.
You can't.
A big cubic inch LS Copo Camaro would be a decent heads up race, if you can afford one.
Mike….you don’t have a 5second ride and I’m not interested in buying a car just like yours to prove my motor is faster.
Do the math……drop 450lbs and you still will not run a 5.50!
It’s sad that a Stocblock 23* head with 14:1 compression and a 700baby lift cam has you shook
quote:Originally posted by Mike Rietow:quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:
Ed will find more excuses for the 5 second Nova factory condition n/a 23 degree sbc 3200 lbs.
So the real question for Ed and his ilk (haters) is.... who else in drag racing could accomplish this with their own two hands??
Engine
transmission
ring & pinion.
Not Ed, unless he paid me to do it for him.
Who Else?
Kinda like YOU making excuses so you don't have to admit your car isn't that fast????
Mike....no one on here cares that you ASSEMBLED your motor....you haven't built anything
Show me one like it in the 5's n/a 3200 lbs 23 degree sbc.
You can't.
A big cubic inch LS Copo Camaro would be a decent heads up race, if you can afford one.
Mike….you don’t have a 5second ride and I’m not interested in buying a car just like yours to prove my motor is faster.
Do the math……drop 450lbs and you still will not run a 5.50!
It’s sad that a Stocblock 23* head with 14:1 compression and a 700baby lift cam has you shook
Put 450 lbs on your tin box Luvtruck and a set of 28 x 10 bias slicks.
Your tin box won't run a 5 anything.
That'll put your tin box at 3,000 lbs, I'll spot you the 200 lbs.
quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:quote:Originally posted by Luvtruck:quote:Originally posted by Mike Rietow:
Ed will find more excuses for the 5 second Nova factory condition n/a 23 degree sbc 3200 lbs.
So the real question for Ed and his ilk (haters) is.... who else in drag racing could accomplish this with their own two hands??
Engine
transmission
ring & pinion.
Not Ed, unless he paid me to do it for him.
Who Else?
Kinda like YOU making excuses so you don't have to admit your car isn't that fast????
Mike....no one on here cares that you ASSEMBLED your motor....you haven't built anything
Show me one like it in the 5's n/a 3200 lbs 23 degree sbc.
You can't.
A big cubic inch LS Copo Camaro would be a decent heads up race, if you can afford one.
Mike….you don’t have a 5second ride and I’m not interested in buying a car just like yours to prove my motor is faster.
Do the math……drop 450lbs and you still will not run a 5.50!
It’s sad that a Stocblock 23* head with 14:1 compression and a 700baby lift cam has you shook
Put 450 lbs on your tin box Luvtruck and a set of 28 x 10 bias slicks.
Your tin box won't run a 5 anything.
That'll put your tin box at 3,000 lbs, I'll spot you the 200 lbs.
You prove your ignorance....I'm running 5.50 now at 2750 and you think 200lbs is gonna knock me out of the 5s LOL..
Mike....my motor is your only chance of running 5s...interested???