DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Brodix head question
Go
New
Find
Notify
Tools
Reply
  
Brodix head question
 Login/Join
 
DRR Trophy
posted
Has anyone gone from a brodix 2x cnc to a 3x 24 degree, just checking to see if there was any improvement in et or mph? The short block is a 565 with 15 to one compression ratio.
 
Posts: 16 | Location: SARASOTA FL 34237 | Registered: February 25, 2002Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
200 rpm's of additional stall equals 50 hp, vice versa, Dave. Deck it to know, objectively.
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Thanks Mike, I forgot to ad that it is fuel injected on alky with a rons terminator. my 60 fts are 1.12 and it runs 5.12 in the 1/8th and 8.0s at 168 in the quarter.i have a 2400 lb cavalier now that's the weight with me in it.
 
Posts: 16 | Location: SARASOTA FL 34237 | Registered: February 25, 2002Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Get a set of the Oval 365 heads. They will outrun the 2X heads for sure.


Abbott Racing Heads
(432) 558-2841
 
Posts: 40 | Location: Crane, Texas | Registered: January 12, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Brodix head question

© DragRaceResults.com 2024