Spraying an SR20 motor

Bracket Talk

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/9387015186

August 10, 2018, 04:17 PM

TORQIN

Spraying an SR20 motor

Well said!

August 10, 2018, 05:53 PM

Big Steve

quote:
Originally posted by sc4087:
quote:
Originally posted by Rick4310:
Why not just let go and dial it...
Nitrous=Sucking at the tree...

Nitrous=taking stripe .02 under for the lose in my experiences

That was pretty my experience with it last year, but it is fun to play with, but also pisses you off when the solenoid does not open when it is suppose to

August 11, 2018, 07:26 AM

369dragster

quote:
Originally posted by Rick4310:
Why not just let go and dial it...
Nitrous=Sucking at the tree...

Sometimes I purge it and then shut it off,Just gives them something to think about!

August 12, 2018, 10:47 AM

Shawn Pinkerton

quote:
Originally posted by TOP38:
quote:
Originally posted by Shawn Pinkerton:
Thinking we had around a 175 or 200 shot in ours. Most it ever was on timer was 2 seconds or used top end of the button. Either way it was pulling 6 degrees. It was enough to move the car without issue.

If your at 200 with 6 out, that's pushing it! What was your base timing? However short blasts do help.

34 degrees. Been running this set up for a while now without issues just simply because of the short hits.