I recently purchased a 2005 235" Undercover 4-Link dragster, car sets low at rear. Does anyone know what the ride height should be front & rear? I've tried looking up "Undercover Motorsports" to ask them, but I haven't had any luck finding a website or phone number?
4 1/2 to 4 3/4 from bottom of bar at mid plate...
Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!
Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
"from bottom of bar" you mean bottom of chassis at mid plate correct? I'll measure it tonight, but I think that will make it have about 1 1/2" of rake down hill from rear to front. Just seems like a lot.
4- 4 1/2 from bottom of mid plate with driver in the car and race ready tire pressure.....Howie
Measure from the bottom of the midplate to the ground with you in the car and race ready. 4 1/2 inches.
Thanks for the info everyone! I measured it last night and it was at 3 1/4" inches so I'll get it raised up and see how it works.
Might want to check your shock spring rate.. Previous owner could have had an aluminum block instead of iron, and if you have iron it could cause the setup to be way off... Just something to consider.
1971 Camaro Split Bumper
|Powered by Social Strata|