|
|
Bracket Talk
Bracket Talk Forum
Tech Talk - by Abruzzi
MSD 6523 ULTRA 6AL PLUS LAUNCH RETARD HELPGo ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | |
| DRR Trophy |
I hooked up a new 6523 6AL programable Plus box . 99% sure very thing is hooked up right, dark blue wire to transbrake/delay box . I built a 2D timing curve to calm things down at launch, saved it, loaded it, but it doesn't retard any when the transbrake releases. I was able to easily a step retard to accomplish a similar timing curve and that works triggering from the delay box tstop timer. What am I missing ?ULTRA | ||
|
| DRR Trophy |
Use the pink wire to activate retard curve . Do not go more than 9.9 degrees of retard. The dark blue wire is for the two step . | |||
|
| DRR S/Pro |
The release of the dark blue launch input starts the Launch Timing Plot. Pink wire is Step Retard, timing retard on demand... ie… Nitrous, ect. Try leaving the Launch Rev Limiter Latched “Not” activated. | |||
|
| DRR Trophy |
Markemark, thanks for the suggestion I tried latch both ways, same result, I don't think the curve I saved is actually loading. when I view the graph for launch retard it is not there, just a flat line, no retard | |||
|
| DRR S/Pro |
Android or Apple? Maybe a step missed in saving first then loading..?? What’s disappointing is they say the Plus works in MSD View (Windows laptop) but I don’t see a product listing for the 6523. | |||
|
| Powered by Social Strata |
| Please Wait. Your request is being processed... |
|
Bracket Talk
Bracket Talk Forum
Tech Talk - by Abruzzi
MSD 6523 ULTRA 6AL PLUS LAUNCH RETARD HELP

