December 09, 2020, 07:32 PM
BG7X77Biondo HS 0
Does or has anyone use/d the Biondo HS-0 BUTTON?
And opinion, pros, cons?
December 10, 2020, 07:56 AM
BG7X77 https://www.biondoracing.com/product/HSA-O.htmlThis one in the link. I don't need a lot of delay. Just less 0.00RED. I typically used the very popular double 0. I also have the 0.01 slow button biondo makes but would like to try a long throw.
If you have a long throw which one have you ended up using and have you had issues with any brands you wouldn't reccomend.
This unit used the same Omron switch that the Double 0 uses.
December 10, 2020, 08:19 AM
Greg KelleyNot the HS button - I use their Terminator button when I run index & Pro Dial. It worked as advertised with the delay built in and the .005 per shim. I use it with just one shim and again the math works out compared to the delay box and standard button.
December 10, 2020, 09:40 AM
BG7X77Thanks. My friend uses a JIT and he really likes/liked it and then it appeared to beging throwing crazy numbers out of nowhere. Like it was sticking. I didnt know if others have had this happen with this or other buttons.
I have seen
JIT
DRP
Terminator
And the one I am looking at.
From a design standpoint I like the simplicity of both the term and HS0.
December 10, 2020, 06:35 PM
Lenny5160I’ve been using a Terminator for several years.
Before I put it in the car, I did a bunch of testing on the practice tree with the shims, and I didn’t see much difference there. The button itself is pretty slow, even with all shims installed.
I run it with 2 or 3 shims out, I think. I’ve never had it stick, but it’s much less likely to do so if I’m not using a lot of throw. I just use it to create enough delay, but from there I make any needed adjustments through launch RPM and maybe tire pressure.
December 11, 2020, 04:18 AM
BG7X77I appreciate the input. I am really working on eliminating any anticipating or trying to find the waiting spot on last light and just REACTING to the flash.