Bracket Talk
titanium beadlock bolts
June 20, 2019, 03:00 PM
sr4440titanium beadlock bolts
I run ti wheel studs and nuts. Not because i was looking for performance but I did a lot of dyno work for the guy who owns ti64 and he gave me one of his 1st drag racing sets. We talked about expanding his drag racing line and looking at it he did! looks like he has bead lock kits.
https://www.ti64.com/titanium-...adlocks-s/110818.htmJoe
Without data, you’re just another guy with an opinion.
June 20, 2019, 03:21 PM
sc4087I've thrown 5-10 lbs in and out of my nose before and didn't notice any difference in ET period. Might have even went quicker when added weight and slower when taking weight out. I don't see the advantage to spending the $$ or time messing with 2 lbs.
Mike Greene
June 20, 2019, 09:43 PM
seabassDeltas use ti studs nuts and washers, and I can tell you from experience Weld will bend you over for a set of them
J.R. Baxter
""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."
2025 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
June 21, 2019, 01:15 AM
davidsracingI removed bolts and weighed them and then weighed the titanium bolts. Total wieght savings was 11 ozs. per wheel. So I spent $300.oo on bolts to save 1 lb 6ozs total and gained nothing on my ET slip. Feel free to learn from my experience.
David
June 21, 2019, 06:35 AM
jenavetquote:
Feel free to learn from my experience.
dave I was tyring to combine it with other items...new wheels 6lbs...titanium bolts...2lbs..lighter axles...6lbs...lightweight converter 21lbs
so those items alone where supposed to give me 35lbs.
but it backfired already..moser new axles are 4.2lbs heavier than my old mosers axles...so plan aborted
June 21, 2019, 06:45 AM
"The Bender"Cheaper to just buy a smaller pulley for the blower...…………..
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
June 21, 2019, 10:14 AM
jenavetquote:
Cheaper to just buy a smaller pulley for the blower...…………..
ive got one but how far am I going to push this lil huffer...im 22 over now if I go to 33 over what am I going to gain? 1/2 a tenth?
June 21, 2019, 03:17 PM
TOP38quote:
Originally posted by jenavet:
quote:
Cheaper to just buy a smaller pulley for the blower...…………..
ive got one but how far am I going to push this lil huffer...im 22 over now if I go to 33 over what am I going to gain? 1/2 a tenth?
How's the rebuild coming! Concentrate on that first...
June 21, 2019, 03:23 PM
jenavetquote:
How's the rebuild coming! Concentrate on that first...
I forgot about that part

June 21, 2019, 06:25 PM
27KeithJust drill a .125 hole thru your bolts.
4 X Track Champion ( 2 & 2 )
2 X Run off Winner
June 22, 2019, 12:05 AM
seabassquote:
Originally posted by jenavet:
quote:
Cheaper to just buy a smaller pulley for the blower...…………..
ive got one but how far am I going to push this lil huffer...im 22 over now if I go to 33 over what am I going to gain? 1/2 a tenth?
Maybe you need a better blower?
J.R. Baxter
""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."
2025 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
June 22, 2019, 06:14 AM
TORQINquote:
Originally posted by seabass:
Deltas use ti studs nuts and washers, and I can tell you from experience Weld will bend you over for a set of them
Agreed! So much for carrying spares...still have em may never need em.
June 22, 2019, 01:27 PM
"The Bender"quote:
Originally posted by seabass:
Maybe you need a better blower?
Yup.
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
June 22, 2019, 03:39 PM
seabassquote:
Originally posted by TORQIN:
quote:
Originally posted by seabass:
Deltas use ti studs nuts and washers, and I can tell you from experience Weld will bend you over for a set of them
Agreed! So much for carrying spares...still have em may never need em.
Ive had to use a few of mine....I’m probably harder on my stuff
J.R. Baxter
""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."
2025 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi