DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    B&M Pro bandit cover screw
Go
New
Find
Notify
Tools
Reply
  
B&M Pro bandit cover screw
 Login/Join
 
DRR Sportsman
posted
Does anyone know the thread size on the countersunk allen screw the holds the side cover on the B&M shifter?


Rick Huffman
Accelerated Graphics
Why was everyone Kung Fu Fighting?
 
Posts: 598 | Location: Burleson TX | Registered: January 24, 2005Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Give me a minute Rick and I’ll check. Okay, the small screws are 10/24.

This message has been edited. Last edited by: Cashflow,


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 5338 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
Definitely put loctite on them they do come loose


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
10x24 and use some blue Loctite.
 
Posts: 138 | Location: Midlothian, Texas | Registered: October 19, 2000Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    B&M Pro bandit cover screw

© DragRaceResults.com 2024