DRR Pro
| normally bullet for me
honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224
|
| | |
DRR Pro
| quote: Originally posted by mopacltd:
Erson is still around?
BBC solid roller lifter Erson Cams for saleTake care. Tom Woerthington
If it seems that bracket racing has gotten too expensive for you, maybe you are just doing it wrong.
|
| | | Posts: 1276 | Location: Rocky Mount, NC | Registered: December 01, 1999 | 
IP
|
|
DRR Top Comp
| After doing a bunch of research and asking questions I choose Bullet. Now one other guy who seems pretty sharp is Mike Jones of Jones Racing Cams in Denver, Co. Regardless of who you choose I would call a bunch of companies and get their opinion before you choose. I called one company and they asked me. "Big block or small block? Circle track or Drag? Okay you need this cam" Did not ask me what cubic inch, intake or heads, what rear gear, transmission, what kind of car or dragster, altered or what ever. Did not ask quarter mile or 1/8 or even what I was wanted to run or improve on. Obviously I would not buy anything from them. Bullet asked a bunch of questions and gave me some options. https://postimg.cc/gallery/np3zpruo/"Dunning-Kruger Effect" -a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge. Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue. 4X NE2 CHAMPION. 2020 TDRA NE2 Champion |
| | | Posts: 4246 | Location: United States of Texas | Registered: April 02, 2011 |
IP
|
|
DRR Pro
| quote: posted March 03, 2019 09:04 AM Hide Post
I've been using Custom Cams Inc. Tommy Kirk has always spec'd camshafts for me and they have been awesome. I install them in engines I build for customers. easy on valve springs and lifters. 662-988-3756.
i used them before,i do remember the cam not being very aggressive
honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224
|
| | |
DRR Top Comp
| quote: Originally posted by Curly1:
After doing a bunch of research and asking questions I choose Bullet.
Now one other guy who seems pretty sharp is Mike Jones of Jones Racing Cams in Denver, Co.
Regardless of who you choose I would call a bunch of companies and get their opinion before you choose. I called one company and they asked me. "Big block or small block? Circle track or Drag? Okay you need this cam" Did not ask me what cubic inch, intake or heads, what rear gear, transmission, what kind of car or dragster, altered or what ever. Did not ask quarter mile or 1/8 or even what I was wanted to run or improve on. Obviously I would not buy anything from them.
Bullet asked a bunch of questions and gave me some options.
Yea with no input on combo you can be sure it will not be good match. Crap in and crap out.
America home of free. Brought to you by 2nd amendment.
|
| | | Posts: 4479 | Location: Greensboro NC | Registered: May 24, 2011 |
IP
|
|
DRR Top Comp
| quote: Originally posted by DLR:
I've been using Custom Cams Inc. Tommy Kirk has always spec'd camshafts for me and they have been awesome. I install them in engines I build for customers. easy on valve springs and lifters. 662-988-3756.
How agreeable to grinding cam of your choice? Roughly cost. I am not in have to have now situation,but will be changing cam since what I have is too much for bracket deal. Might give him a call and see what he has to say. Couple others have told they will not grind cam I want since they feel its not what I need. They may be right,but when I am paying I have stupid idea they should advise then build if I want.
America home of free. Brought to you by 2nd amendment.
|
| | | Posts: 4479 | Location: Greensboro NC | Registered: May 24, 2011 |
IP
|
|
DRR S/Pro
| Those buying from Erson are they custom grinds or off the shelf? Who is the go to guy at Erson? |
| | |
DRR Pro
| quote: posted March 03, 2019 10:00 AM Hide Post
Those buying from Erson are they custom grinds or off the shelf? Who is the go to guy at Erson?
bullit is also erson
honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224
|
| | |
DRR Pro
| Comp Cams. My cylinder head guy is good friends with Billy Goldbold.... Mike Jones of Jones Cams is not in Denver, Co. He's in Denver, NC...just an fyi.... I did try a Jones custom cam over my comp before I left Denver (CO). I lost more than .4 and 5 mph...my combo just didn't like the cam he sent...not saying he doesn't do good cams, just didn't work as well in my combo... Last Erson cam I had ran well also....good cams. Mark Goulette Owner/Driver of the Livin' The Dream Racing dragster www.livinthedreamracing.com"Speed kills but it's better than going slow!" Authorized Amsoil Retailer |
| | | Posts: 1525 | Location: Back home in Alaska! | Registered: February 13, 2011 |
IP
|
|
DRR Pro
| quote: Originally posted by TD3550:
^^ Hows things down there "Tropics" lol Far cry from 10' of snow and - 40.
Hot and humid. Ugh. Immokalee isn't working for me, can't stick my car for ****. Going to Bradenton next time. AC went out in the shop, gonna cost me $800 for the new fan motor. That's with me doing the install. Other than that, I miss home and am planning my eventual move back... Mark Goulette Owner/Driver of the Livin' The Dream Racing dragster www.livinthedreamracing.com"Speed kills but it's better than going slow!" Authorized Amsoil Retailer |
| | | Posts: 1525 | Location: Back home in Alaska! | Registered: February 13, 2011 |
IP
|
|
