DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Roll Cage padding
Go
New
Find
Notify
Tools
Reply
  
Roll Cage padding
 Login/Join
 
DRR Trophy
posted
Who offers a good roll cage padding. I need the kind that can bend easily to conform to the cage
Thanks

Brian
 
Posts: 108 | Location: north carolina | Registered: July 02, 2003Reply With QuoteReport This Post
DRR S/Pro
Picture of CURTIS REED
posted Hide Post
I haven't found any of the SFI spec to be easy to form to the roll cage and I have tried 3 different brands. If you do find some let us know on here.

Curtis



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 3143 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Trophy
Picture of sst5167
posted Hide Post
quote:
Originally posted by CURTIS REED:
I haven't found any of the SFI spec to be easy to form to the roll cage and I have tried 3 different brands. If you do find some let us know on here.

Curtis


I use the Allstar brand SFI padding. Take a heat gun and work it slowly into the bend.


Mike Boehner
 
Posts: 93 | Location: Lake Havasu City, AZ | Registered: January 19, 2011Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
I have found JAZ roll bar padding to be fairly easy to form and also has a velcro strip in it so you can remove it. With any brand take a heat gun a warm it up a little helps allot
 
Posts: 2544 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Pro
Picture of Alaskaracer
posted Hide Post
Any sfi padding is going to be tough to bend...as mentioned a heat gun does wonders. I was able to do mine during the summer time and I just set it out in the sun for a while....bent easily without breaking


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1540 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post
DRR Trophy
Picture of Team C
posted Hide Post
quote:
Originally posted by Big Steve:
I have found JAZ roll bar padding to be fairly easy to form and also has a velcro strip in it so you can remove it. With any brand take a heat gun a warm it up a little helps allot



X2 on the Velcro!!!
 
Posts: 20 | Location: Glasgow, VA | Registered: July 19, 2016Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
None, there is none I know of that conform well that are SFI approved and I have tried 4 brands. Worst was the Allstar and best I have found was Longacre. Heating them was a little help but still they crack and break.

The SFI stuff is very hard (Brittle) and I would think it should be softer to absorb shock better.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4282 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post



  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Roll Cage padding

© DragRaceResults.com 2024