Go
New
Find
Notify
Tools
Reply
  
Sr20 head studs
 Login/Join
 
DRR Trophy
posted
I have a set of sr20 heads that are ported. The intake runners have been ported into four of the head studs. They have brass tubes in them. I cant remember which four cylinders have them. I want to silicone the head bolt washers but not sure which ones to do?
 
Posts: 3 | Location: great north west | Registered: May 28, 2009Reply With QuoteReport This Post
DRR Sportsman
Picture of TD3550
posted Hide Post
On my BMF 385 heads, i have the same thing and it is not an issue. Since there is a thin layer of epoxy over the tubes on the wall of the runner on the intakes. The tubes aren't loose in there are they?
 
Posts: 1417 | Location: Under a Truck | Registered: August 23, 2013Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024