DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    MT 3080 pressure question
Go
New
Find
Notify
Tools
Reply
  
MT 3080 pressure question
 Login/Join
 
DRR Sportsman
Picture of rs72z
posted
Anyone running the 3080 33x15x15 on a 2900ish lb door car? What pressure are you running?

Car is ladder bar, glide, 4.88 gears running 5.90's, 468 engine.
Just looking for a starting point. I was thinking 8lbs.
 
Posts: 206 | Location: texas | Registered: November 13, 2008Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
3000lbs 8.12 @ 168 mph ladder bar a-arm car ran 8-8.5 lbs in my car with the 3080s
 
Posts: 5 | Location: Sandy, Oregon | Registered: November 06, 2014Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Mine is 2600lbs.,582 conv. heads,run 'em @ 7lbs.Been 1.11 60ft. Smile
 
Posts: 106 | Location: Indy | Registered: April 08, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of rs72z
posted Hide Post
Thanks Guys!
 
Posts: 206 | Location: texas | Registered: November 13, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    MT 3080 pressure question

© DragRaceResults.com 2023