10" converter with baby blower

May 24, 2022, 08:28 AM

1320racer

YOU, elected to fuc this thread up, I replied to the OP answering his specific question.

May 24, 2022, 09:22 AM

sc3171

quote:
Originally posted by Nitrous1:
quote:
Originally posted by sc3171:
quote:
Originally posted by Nitrous1:
anyone try a 10" yet?

I got a 10” Abruzzi for mine. I took a 9” FTI 93bc out to replace it with. It’s a bit tight so I’ll need to send it back in but the 60’ was so much more consistent and it locked down in high gear. 7.06 @ 192 in 3500’ this weekend.

rpm at 1/8 with with tire size and gear?

6700 at the 1/8

34.5 tire
4.11 gear

I took the 93bc out because it likely would have been 8200 in the 1/4. Need to find something in the middle

May 24, 2022, 09:46 AM

Mike Rietow

Need a 9" Cortina core converter. Someone has one sitting on a shelve, that they don't know what they have in their possession.

May 24, 2022, 10:41 AM

Bucky

I’m running a bolt together 9.5” from PTC. I don’t know what they are doing to keep them from being too tight down low on a smaller inch turbo application, but lock up so well on the big end. But they do it. I’m really happy and impressed

May 24, 2022, 12:18 PM

Nitrous1

quote:
Originally posted by sc3171:
quote:
Originally posted by Nitrous1:
quote:
Originally posted by sc3171:
quote:
Originally posted by Nitrous1:
anyone try a 10" yet?

I got a 10” Abruzzi for mine. I took a 9” FTI 93bc out to replace it with. It’s a bit tight so I’ll need to send it back in but the 60’ was so much more consistent and it locked down in high gear. 7.06 @ 192 in 3500’ this weekend.

rpm at 1/8 with with tire size and gear?

6700 at the 1/8
34.5 tire
4.11 gear

I took the 93bc out because it likely would have been 8200 in the 1/4. Need to find something in the middle

running same gear and tire. I'm closer to flash at 7000. and 7300@ 1/8 at 155mph