Bracket Talk
Enderle carb bypass setup

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/8667014396

June 01, 2021, 03:20 PM
Dave Koehler
Enderle carb bypass setup
What is high rpm?
Why haven't you run it up higher to find out?


Dave Koehler - Koehler Injection - http://www.koehlerinjection.com
Fuel Injection - Nitrous Charger - Nitrous Master Software - Balancing
99% of fuel injection problems are electric.
June 01, 2021, 04:26 PM
I Hate Dragsters
I’m guessing it’ll be 7300-7500 at the 1/8.

I try to keep peace with my neighbors otherwise I’d let er eat in the driveway

This message has been edited. Last edited by: I Hate Dragsters,
June 01, 2021, 05:21 PM
Curly1
quote:
Originally posted by I Hate Dragsters:
I’m just concerned it’ll have upwards of 12 at high rpm. I don’t currently have a racepak but plan on tossing on a GoPro to the gauge so I can know for sure.


Yes, you need to know exactly what pressure you have at finish line. At wide open you can get away with more fuel pressure than you can at idle.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
June 05, 2021, 10:54 AM
I Hate Dragsters
For reference .190 was 11-12# at the 1/8. Baby blower going 4.60.