DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Beam shield for spoke wheels
Go
New
Find
Notify
Tools
Reply
  
Beam shield for spoke wheels
 Login/Join
 
DRR Sportsman
posted
Is there any need for a beam shield on spoked dragster wheels these days with the infrared beams? Back when incandescent lights were used these shields seemed necessary. Considering removing mine if not needed.
 
Posts: 397 | Location: Plano, TX | Registered: May 16, 2001Reply With QuoteReport This Post
DRR Sportsman
Picture of David Gerard
posted Hide Post
We just have a small light "Half-moon" aluminum piece attached to the chassis or body underneath the front axle that will block any light problems.

The outside diameter is about the size of the inside of the rim and has never been a problem.

Almost invisible too!
 
Posts: 422 | Location: Fullerton, CA | Registered: June 08, 2008Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
HAYDEN WHEELS. jON WILL TAKE CARE OF YOU AHS THEM FOR ALL SIZE SPOKE WHEELS. Sry caps on and too lazy to retype.
https://www.haydenent.com/Photos/HaydenEntLogo.jpg




America home of free. Brought to you by 2nd amendment.
 
Posts: 4219 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
my bad mistook for wire spokes,but jon maybe able to help if you decide you need them.

Hey been building FED for lifetime and kind of burned into mind set.LMAO




America home of free. Brought to you by 2nd amendment.
 
Posts: 4219 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Beam shield for spoke wheels

© DragRaceResults.com 2024