DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    chrome moly tubing ID
Go
New
Find
Notify
Tools
Reply
  
chrome moly tubing ID
 Login/Join
 
DRR Elite
posted
Looking for what size to get so I can use the id as an axle of sorts for a project. Need 5/16" id. Anything close?


Foxtrot Juliet Bravo
 
Posts: 6461 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of TD3550
posted Hide Post
With 5/16 round CM.

0.3125 in. Outside Diameter
0.035 in. Wall thickness
0.243 in. Inside Diameter.

This round stock going through 5/16?
 
Posts: 1421 | Location: Under a Truck | Registered: August 23, 2013Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Bucky try Shaprio Metals supply in St. Louis. Good folks bought from them before.They can help you get the correct size.

This message has been edited. Last edited by: vetman,


The difference between ignorance and stupidity. Ignorance is lack of knowledge. Stupidity is the inability to learn. Don't be stupid
 
Posts: 428 | Location: des moines iowa | Registered: January 10, 2020Reply With QuoteReport This Post
DRR S/Pro
Picture of CURTIS REED
posted Hide Post
Don’t know what wall thickness you want but here you can look over the choices.

https://www.mcmaster.com/chrome-moly-steel



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 3152 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Elite
posted Hide Post
quote:
Originally posted by TD3550:
With 5/16 round CM.

0.3125 in. Outside Diameter
0.035 in. Wall thickness
0.243 in. Inside Diameter.

This round stock going through 5/16?


Poorly explained by me. A 5/16 shoulder bolt will go inside this tubing.


Foxtrot Juliet Bravo
 
Posts: 6461 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
3/8 .063 would be .312 ID and 5/16 is .3125
 
Posts: 25 | Location: Iowa | Registered: May 30, 2013Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    chrome moly tubing ID

© DragRaceResults.com 2024