Originally posted by 1320racer: Vern, you forgot to say electric.
quote:
Originally posted by RacerVX54: Now what to do fix it and leave it a 509? Or step it up a bit to a 565 or something.. Was an original Reher Morris motor that i bought use from Bruce Guertin who post here. 19 years old and still kicking...
Brian, My vote is to fix it, you obviously have been happy with it's performance for 2 decades.
Probably will be what happens lol. Can't ***** this motor doesn't owe me a dime.. Its been a great piece for sure. Would like to go TAD quicker ,but i dunno i am content with what it runs.
Probably will be what happens lol. Can't ***** this motor doesn't owe me a dime.. Its been a great piece for sure. Would like to go TAD quicker ,but i dunno i am content with what it runs.
Post the combo or Pm it to me, as it is now and let’s see if we can’t pick it up at least a tenth and 1 mph.
December 13, 2020, 02:41 PM
nomad
I have the parts list of what was in it right here on my desk. It's barely readable since it's dot printed.
Well I ran it 2 or 3 season's and it was good to me.
This message has been edited. Last edited by: nomad,
nomad Bruce Guertin
Easily distracted by bright shiny objects.
Wife says I'm a new adventure every day.
Call Automotive Performance Engines for all your complete engine building, dyno service needs 863-967-8781
December 13, 2020, 03:29 PM
1320racer
Dart block, Brodix BB2 heads, Edelbrock Victor manifold, Jesel Rockers, Gary Williams 1050 Carb?
December 13, 2020, 03:57 PM
nomad
GM GEN V block, Sharp rockers. 411 Moroso pan, Mallory dizzy, Cloyes chain. Made 817 on the R & M pump.
Dave Reher and I had a conversation about this at the Vegas Nats one time. They changed to the Dart block the next year as the GM block became hard to get. Going to the Dart heads over the BB-2 saved them 12 hours of prep time. I used Lemon's Headers on it.
The Williams carb forced me to learn about carbs. Not saying there was anything wrong with the carb but, Williams lacked people skills and I lacked carb skills.
I'm not sure what Brian and Butch have done to this engine since I sold it.
I would not hesitate to use another R & M engine.
nomad Bruce Guertin
Easily distracted by bright shiny objects.
Wife says I'm a new adventure every day.
Call Automotive Performance Engines for all your complete engine building, dyno service needs 863-967-8781
December 13, 2020, 04:13 PM
RacerVX54
Harland sharp rockers. Now has the SV1 alky carb and is a 509 now. It made 831-750 last time on the dyno. Other then that its the same. Ditto on the Reher-Morrison engines.This message has been edited. Last edited by: RacerVX54,
"Just Shut Up and Race"
Brian Martin Martin Racing 5.42 @127
December 13, 2020, 04:51 PM
1320racer
what can that block be safely bore to?
December 13, 2020, 04:59 PM
RacerVX54
quote:
Originally posted by 1320racer: what can that block be safely bore to?
Not sure but i think they can go 4.60 to make 565. I might be wrong though i am looking on the net now.
"Just Shut Up and Race"
Brian Martin Martin Racing 5.42 @127
December 13, 2020, 05:10 PM
1320racer
you have a 4.00" stroke crank?
December 13, 2020, 05:23 PM
RacerVX54
quote:
Originally posted by 1320racer: you have a 4.00" stroke crank?
Yes 4.00 i believe is 4.50 bore with 4.00 crank now. Block number is a 10237292 ho/marine block on the build sheet i have, But looking at the reher build sheet it has gen 5 parts like timing cover oil pan and windage tray..This message has been edited. Last edited by: RacerVX54,
"Just Shut Up and Race"
Brian Martin Martin Racing 5.42 @127
December 13, 2020, 05:51 PM
RacerVX54
Application:
BIG BLOCK CHEVORLET 396-502
Brand:
Erson Cams
Cam Type:
SOLID ROLLER
CID:
396, 454, 502
Duration @ .050:
274/278
Duration Advertised:
302/306
Grind Number:
R-302-2A
Gross Lift:
.740/.740
Lobe Center:
108
Make:
Chevrolet
Part Name:
Engine Camshaft
RPM Range:
4500-7500
Valve Lash:
.025/.026
"Just Shut Up and Race"
Brian Martin Martin Racing 5.42 @127
December 13, 2020, 05:53 PM
1320racer
With your current heads, I suggest staying with the 4.00" stroke and boring the block to 4.570 for 522 cubes or 533 if you can safely bore this block to 4.600. this 4" stroke combo will accelerate quicker than the 4.25" stroke 565.
December 13, 2020, 05:53 PM
RacerVX54
heads are bb-2 plus
"Just Shut Up and Race"
Brian Martin Martin Racing 5.42 @127
December 13, 2020, 09:19 PM
nomad
AFAIK that block is restricted to a .030 over or 4.500. I think it may be the block used in the ZZ502 engines. It may go more but, I wouldn't try that without sonic testing.
One of the heads had a heli coil in a valve cover hole.
nomad Bruce Guertin
Easily distracted by bright shiny objects.
Wife says I'm a new adventure every day.
Call Automotive Performance Engines for all your complete engine building, dyno service needs 863-967-8781
December 14, 2020, 06:25 PM
RacerVX54
quote:
Originally posted by nomad: AFAIK that block is restricted to a .030 over or 4.500. I think it may be the block used in the ZZ502 engines. It may go more but, I wouldn't try that without sonic testing.
One of the heads had a heli coil in a valve cover hole.
Reher said it could go another 30 but that is it.
"Just Shut Up and Race"
Brian Martin Martin Racing 5.42 @127
December 14, 2020, 06:30 PM
1320racer
How many runs on the crank, rods, pistons?
December 14, 2020, 09:08 PM
RacerVX54
[QUOTE]Originally posted by 1320racer: How many runs on the crank, rods, pistons?[/QUOTE
225ish on the rods and pistons 19 years on the crank that was checked and mag when rods and pistons where replaced. Pretty sure just gonna fix it and run what i got for now.. Maybe a new 4.00 crank just to be safe
"Just Shut Up and Race"
Brian Martin Martin Racing 5.42 @127
December 15, 2020, 04:15 AM
1320racer
sounds like a good plan
December 30, 2020, 10:05 AM
Greg Kelley
Cowl hood & headlights to be legal for local index races.