BBC belt drive fuel pump mounts

Bracket Talk

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/8447090496

August 06, 2020, 10:19 PM

JPosey

BBC belt drive fuel pump mounts

Looking for options on BBC belt drive fuel pump mounts. 80a Enderle Style. I have the ‘Rupert’ mount and need to relocate it possibly. Internet search shows Good Vibrations has one and I’m checking with them tomorrow. Right side mounting location. Trying to free up space to help with my cooling issue in my previous post. Any help for parts source is greatly appreciated.

August 06, 2020, 10:37 PM

Cashflow

Mine is mounted on the crank trigger bracket. Works great, you might look into that. I run a Star mandrel and vacuum pump.

August 07, 2020, 05:05 AM

JPosey

My current mount style is off the crank trigger. It looks and and works good but the problem is I cannot, so far, get the lower radiator hose to pass in between mount studs and crank trigger. Largest I can get is an 10an. I using a CSR pump and this is on a dragster.

August 07, 2020, 05:30 AM

B.C.Malibu

I bolted a flat 1/2” thick alum plate to the front 7/16” bolt holes and put the pump where I wanted it.
After that I cut away the extra plate material to clean up the front.

August 07, 2020, 08:03 AM

Greg Kelley

available from James Monroe http://www.killerrons.com/raceproductdevelopment.cfm

August 07, 2020, 07:18 PM

HS professor

quote:
I bolted a flat 1/2” thick alum plate to the front 7/16” bolt holes and put the pump where I wanted it.
After that I cut away the extra plate material to clean up the front.

That's what I did to mock up a BLP pump on the truck, worked pretty good but ended up using an Aeromotive pump and that uses two long stands to space the pump away from the block, pretty simple.
I've also seen people use the Moroso mount that bolts to the waterpump, another pretty simple setup

August 07, 2020, 09:02 PM

Curly1

Also GoodVibrations and Alkydigger both have a fuel pump from the Jesel or other belt drives right off the cam. No belts or adjustments once set up.

https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion

August 08, 2020, 12:02 PM

AlkyIROC

quote:
Originally posted by Curly1:
Also GoodVibrations and Alkydigger both have a fuel pump from the Jesel or other belt drives right off the cam. No belts or adjustments once set up.

I would have done that with my engine but I have a water pump in the way.

August 08, 2020, 12:13 PM

B.C.Malibu

quote:
Originally posted by HS professor:
quote:
I bolted a flat 1/2” thick alum plate to the front 7/16” bolt holes and put the pump where I wanted it.
After that I cut away the extra plate material to clean up the front.

That's what I did to mock up a BLP pump on the truck, worked pretty good but ended up using an Aeromotive pump and that uses two long stands to space the pump away from the block, pretty simple.
I've also seen people use the Moroso mount that bolts to the waterpump, another pretty simple setup

I milled away whatever I needed from the stands to line it up .
I have Rons FI brckets and a Kinsler pump.

August 08, 2020, 09:30 PM

seabass

I have a couple cam drive mounts for Enderle pumps that fit Jesels that I know longer need...

J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2025 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi

August 09, 2020, 08:56 PM

JPosey

Thanks for all replies. It gave me some good ideas. I went ahead and ordered the enderle water pump mount and belt but will make one like described if needed. Thanks all.