Bracket Talk
Bushed lifters
January 09, 2020, 03:08 PM
7959Bushed lifters
What is everyone using for a BBC 903 bushed lifter with low failure rate?
January 09, 2020, 03:34 PM
WHOMPWHOMPBAM...The latest version that doesn’t even have a bushing...
January 09, 2020, 04:41 PM
Greg KelleyHappy with Crowler here (.847)
January 09, 2020, 07:32 PM
Lenny5160quote:
Originally posted by WHOMPWHOMP:
BAM...The latest version that doesn’t even have a bushing...
Have we gone full circle back to solid flat tappet lifters as the hot thing?
I have to be near 1000 runs on Isky .842 bushed lifters.
I have .937 Crower bushed in the other car. Not enough runs on it to be impressive, but so far so good.
Tony Leonard
January 09, 2020, 07:40 PM
AlaskaracerCrower, not Crowler..
Sorry, that drives me crazy.
Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
January 09, 2020, 07:55 PM
57 VetteISKY .904 EZ Roll Bushing roller lifters in my SDPC 582 Head Hunter engine, going on three years trouble free service. No needles for me!!
IHRA ACDELCO Canadian Nationals
Top/et Iron man Champion
Don Davis 57 Corvette Super Gas roadster
582 Head Hunter on alcohol
January 09, 2020, 08:37 PM
WHOMPWHOMPquote:
Originally posted by Lenny5160:
quote:
Originally posted by WHOMPWHOMP:
BAM...The latest version that doesn’t even have a bushing...
Have we gone full circle back to solid flat tappet lifters as the hot thing?
I have to be near 1000 runs on Isky .842 bushed lifters.
I have .937 Crower bushed in the other car. Not enough runs on it to be impressive, but so far so good.
Apparently...
January 09, 2020, 09:41 PM
Big Stevequote:
Originally posted by 57 Vette:
ISKY .904 EZ Roll Bushing roller lifters in my SDPC 582 Head Hunter engine, going on three years trouble free service. No needles for me!!
IHRA ACDELCO Canadian Nationals
Top/et Iron man Champion
Don Davis 57 Corvette Super Gas roadster
582 Head Hunter on alcohol
Isky EZ roll 904s here too. Blown 540 TD 95 runs and like brand new
January 10, 2020, 01:51 AM
irf3Crower 904s over 1000 runs and still perfect. Can't believe. 430 440 car
January 10, 2020, 12:36 PM
Triple NickelIsky EZROLLHELIX in one car EZROLLMAX in the other. Very happy with both. Not enough data to comment on long term life, but i was very happy with the ISKY bushing lifters in my other motor, outlasted the Crower severe duty pin oilers.
I did have bad luck with some crower bushing lifters in stock diameter BBC. Lost a lifter on 750 lift cam at 100 passes. Just should not have happened.
January 22, 2020, 02:37 PM
00 DEAD ONISKY 904 BUSHED. Got over 900 runs on my 632 and when I sent them back they asked me why I sent them in. Was told they were in perfect shape. I said rebuild anyway for a piece of mind
Brian Mollison
2013 American Dragster
2020 Sumerduck Dragway VA Top ET Champion
2017 Sumerduck Top ET & SSS Track Champion
2017 MAC Top ET Track Champion
2009 Sumerduck Dragway Va Top ET & IHRA SSS Track Champion
2008 IHRA Division 1 Top ET Bracket Final Runner-up
2007 Colonial Beach Dragway Top ET Track Champion
January 22, 2020, 04:32 PM
SCDIV1quote:
Originally posted by 00 DEAD ON:
ISKY 904 BUSHED. Got over 900 runs on my 632 and when I sent them back they asked me why I sent them in. Was told they were in perfect shape. I said rebuild anyway for a piece of mind
What was the cost to rebuild a set ?
I just had a set converted from needle bearings to bushings and the price was a lot higher than expected. I did not deal direct....had a local shop send them in....
You can PM me if you would prefer....
January 22, 2020, 08:07 PM
T/D6591To convert a set is usually right around 720.00 plus shipping.
January 23, 2020, 05:00 AM
SCDIV1Thanks. That is more in line with the price I was told and a pair was replaced with new.
January 23, 2020, 05:21 AM
Curly1I use the Crower bushed lifters and have not had any problems.
https://postimg.cc/gallery/np3zpruo/"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.
Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.
4X NE2 CHAMPION. 2020 TDRA NE2 Champion