DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Hoosier Tire Pressure
Go
New
Find
Notify
Tools
Reply
  
Hoosier Tire Pressure
 Login/Join
 
DRR S/Pro
posted
I am using a Hoosier 18370 DO5 and been running the tire pressures between 6.25 and 7.25. 2200# car, 1.80 / 4.29 with a 582. 1.16 -1.17 60's and average 5.00 @ 660 / 136.

Just curious to hear from anyone using the same tire what you have experienced with pressures. Not trying to rotate the world just being consistent.

Thanks:

Bob
 
Posts: 3205 | Location: Lakeside, Ca | Registered: February 15, 2003Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
I use the tire on my chevy2 occasionally at 2550 lbs. Aluminum 632 with 180 planets and 4.30 gear, 9 psi and up to 10 depending on conditions. Been 4.95 at 141 in good air.
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of DLR
posted Hide Post
Same tire I use on my car, I run 8 lbs usually. SBC 2450 lbs 5.50's to 5.60.
 
Posts: 476 | Location: BENTON HARBOR, MI | Registered: August 29, 2007Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Curious what anyone is running on a Hoosier 18175 (29x10.5W stiff wall)? I'm ~3100# 5.80s @ 117 with a 1.2x 60'. I've been 15-18# with 18# seeming to be the best so far on this tire. The car has been really good or it spins/shakes. I've gone down in pressure and it gets worse. Guys at my track think I'm insane to be running 18# but it seems to be working-ish?
 
Posts: 76 | Location: Oostburg WI | Registered: October 16, 2020Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Hoosier Tire Pressure

© DragRaceResults.com 2024