Bracket Talk
Life of BTE 1.80 Straight Cut
April 05, 2018, 08:28 PM
Slick VicLife of BTE 1.80 Straight Cut
Whats the avg life of one? Mine lasted only about 4 years, is this the norm?
302-786-1078
slickvic@slickvicracing.com
slickvic@slickvicracing.com
www.slickvicracing.com302-786-1078
Dealer for most major brands, including Simpson, Necksgen, Hans, Strange, Moser, Amsoil, Aerospace, Digital Delay, Hoosier, M/T, Goodyear, Redhorse, MSD, Racepak, Lucas, and more.
Complete racecar wiring and custom CNC parts available.
April 05, 2018, 09:31 PM
Scott Creeda friend had to replace his set out of his 6.60 nova. I thought it was a lifetime item. He bought Sonnax to replace it and said it looks like space shuttle parts next to wright brothers parts.
April 05, 2018, 10:28 PM
Stephen HughesI had one in my dragster for 7-8 years until other breakage caused some damage to the output shaft. I took the gears and installed them in a full length carrier and they are now working fine in my door car. I put a BTE 1.69 in my dragster and the teeth on those gears are noticeably smaller, hopefully it holds up as long as the 1.80 did.
The Pull-Out....for when you want to work smarter, not harder!!!
April 06, 2018, 04:17 AM
green1Not BTE but I got a set of TCI 1.80 that are 17 years old going mid to high 8s in a door car 1/4 mile.
April 06, 2018, 06:53 AM
Mike Nitzsche13 years and still going. Been anywhere from 5.60's to 4.90's it's whole life.
April 06, 2018, 12:03 PM
Will Harrisonquote:
Originally posted by Scott Creed:
Sonnax to replace it and said it looks like space shuttle parts next to wright brothers parts.
yup
.991 60'
4.36 @ 159 so far.....
6.86 @ 198 trying for more......
533" single carb
235" Harrison 4-link
April 07, 2018, 10:12 PM
Bob Nicholsquote:
Originally posted by Stephen Hughes:
I had one in my dragster for 7-8 years until other breakage caused some damage to the output shaft. I took the gears and installed them in a full length carrier and they are now working fine in my door car. I put a BTE 1.69 in my dragster and the teeth on those gears are noticeably smaller, hopefully it holds up as long as the 1.80 did.
I am afraid the 1.69 is not as strong as the 1.80 for the very reason you described. The teeth are thinner and they cannot handle as much torque. If you upgrade to a 1.65 gearset, the teeth are much thicker.
April 08, 2018, 12:02 AM
Stephen HughesBob, it was indeed a noticeable difference between the size of the teeth. I like the way the car works with it, so I may do just as you said and try a 1.65 next time around.
The Pull-Out....for when you want to work smarter, not harder!!!
April 08, 2018, 09:19 AM
seabassquote:
Originally posted by Stephen Hughes:
Bob, it was indeed a noticeable difference between the size of the teeth. I like the way the car works with it, so I may do just as you said and try a 1.65 next time around.
1.65 sonnax is a good piece for sure
J.R. Baxter
""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."
2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi