DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Dragster grab handles
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Dragster grab handles
 Login/Join
 
DRR Trophy
Picture of mike valli
posted
who makes grab handles that strap on so you can pull yourself out of the car?


06 Race Tech 4L.. T/D
632 MTRE
14* SONNY
Profiler
DUAL carbs
Kooks

Biondo
FTI
.9 /60'
6.? 1320
ALL MTR
http://i276.photobucket.com/al...ch/1329770971717.jpg
 
Posts: 42 | Location: florida | Registered: June 14, 2006Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Call Danny or Jansen at M&M race cars


Jason Compton
 
Posts: 34 | Location: Tennessee | Registered: January 13, 2018Reply With QuoteReport This Post
DRR Pro
Picture of 00 DEAD ON
posted Hide Post
My 08 American has grab handles and rollers on the bottom of the chassis like the M&M dragsters


Brian Mollison
2013 American Dragster
2020 Sumerduck Dragway VA Top ET Champion
2017 Sumerduck Top ET & SSS Track Champion
2017 MAC Top ET Track Champion
2009 Sumerduck Dragway Va Top ET & IHRA SSS Track Champion
2008 IHRA Division 1 Top ET Bracket Final Runner-up
2007 Colonial Beach Dragway Top ET Track Champion
 
Posts: 1032 | Location: Stafford, Virginia | Registered: October 03, 2006Reply With QuoteReport This Post
DRR Pro
Picture of Rob7181
posted Hide Post
Call Ray Miller, I bought a set to bolt in and love them. Have had several people try them and they bought sets too.


Rob Robertson
 
Posts: 961 | Location: Welcome, MD | Registered: December 06, 1999Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
I would like to see pictures of the grab handles and the rollers on the bottom of chassis. I am building a new front engine dragster and now is the time to add anything like that. I went to M&M website but no pictures of them.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4321 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I was just at the M&M shop a few weeks ago picking up my motor. Was checking out some of the new cars they were building. They put a lot of thought into putting little things on them to make life easier. From the grab handles,air actuated steps(handy for people like me with a lotta birthdays) to the locking nose caps. I agree the website could be a little more inform-able.But you'd be hard pressed to do business with any better people.


Jason Compton
 
Posts: 34 | Location: Tennessee | Registered: January 13, 2018Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by Curly1:
I would like to see pictures of the grab handles and the rollers on the bottom of chassis. I am building a new front engine dragster and now is the time to add anything like that. I went to M&M website but no pictures of them.




J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
 
Posts: 1554 | Location: Waxahachie | Registered: July 04, 2005Reply With QuoteReport This Post



DRR Top Comp
Picture of Curly1
posted Hide Post
Thanks JR, that is really nice.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4321 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Elite
posted Hide Post
Sometimes you even gotta dumb down a picture for some people. But is there one set of rollers, or is there one in the seat area too? I high centered my car across a paved road once. That was a pretty proud moment.


Foxtrot Juliet Bravo
 
Posts: 6468 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
quote:
Originally posted by Bucky:
Sometimes you even gotta dumb down a picture for some people. But is there one set of rollers, or is there one in the seat area too? I high centered my car across a paved road once. That was a pretty proud moment.


I talked to M&M today and ordered one set of the wheels. He did say they usually put two sets on their dragsters to help those who load it in backwards and those who drive it in. I am just going to use one set on my car.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4321 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of TD6297
posted Hide Post
Rollers like for underneath the frame? S&W sells those.
 
Posts: 161 | Location: Canada | Registered: April 17, 2013Reply With QuoteReport This Post
DRR Elite
posted Hide Post
I think those are in my future.


Foxtrot Juliet Bravo
 
Posts: 6468 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Elite
posted Hide Post
quote:
Originally posted by TD6297:
Rollers like for underneath the frame? S&W sells those.


Looking online. Haven't found them yet.


Foxtrot Juliet Bravo
 
Posts: 6468 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of J178RED
posted Hide Post
Bucky hope this helps...
http://www.swracecars.com/stor...adles-OSCAR_346.aspx


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2698 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post



DRR Sportsman
Picture of Stephen Hughes
posted Hide Post
I built my own handle that attaches with a T-bolt clamp on upper frame rail. 1.125 chromoly bent almost 90 degrees, i’ve alreay had to make a couple more for buddies since they saw mine.


The Pull-Out....for when you want to work smarter, not harder!!!
 
Posts: 337 | Location: Texas | Registered: September 12, 2005Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by Bucky:
Sometimes you even gotta dumb down a picture for some people. But is there one set of rollers, or is there one in the seat area too? I high centered my car across a paved road once. That was a pretty proud moment.


2 sets of rollers, one under the rear of the seat and th eother in front of the foorbox


J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
 
Posts: 1554 | Location: Waxahachie | Registered: July 04, 2005Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
I believe if I set it up right I can have a "Cradle" for the chassis wheels and a set for the front tires. When it rolls up on the cradle and then drops down in there it would reduce or eliminate the need for a chassis pillow. Roll it up in there, strap it down and go.
My new car is front engine dragster and this just may make it easier to load and more solid for towing.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4321 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Elite
posted Hide Post
quote:
Originally posted by J178RED:
Bucky hope this helps...
http://www.swracecars.com/stor...adles-OSCAR_346.aspx


That's it!

Curly, your idea would work. But, if you are hitting bumps with the trailer and the car bounces up and down on those wheels, that's pretty jarring and will crack something, even if it is only the wheel mount. If you tie it down on those wheels, that would eliminate it.


Foxtrot Juliet Bravo
 
Posts: 6468 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR Trophy
Picture of mike valli
posted Hide Post
thank you all for your response


06 Race Tech 4L.. T/D
632 MTRE
14* SONNY
Profiler
DUAL carbs
Kooks

Biondo
FTI
.9 /60'
6.? 1320
ALL MTR
http://i276.photobucket.com/al...ch/1329770971717.jpg
 
Posts: 42 | Location: florida | Registered: June 14, 2006Reply With QuoteReport This Post
DRR S/Pro
Picture of The Bozman
posted Hide Post
quote:
Originally posted by Stephen Hughes:
I built my own handle that attaches with a T-bolt clamp on upper frame rail. 1.125 chromoly bent almost 90 degrees, i’ve alreay had to make a couple more for buddies since they saw mine.


Stephen,
Can you post or send some pictures of yours? Those fat boy handles have to be worth it.


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2498 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Dragster grab handles

© DragRaceResults.com 2024