December 03, 2018, 03:05 PM
7959Throttle cable bracket
Who makes a nice throttle cable bracket for use with a morse cable and extended for a SLE. Used on a dragster without a scoop mount. My 4500 has the scoop mounting flange.
Thanks
December 03, 2018, 03:11 PM
Buck2248go to racingjunk and look at ad # 183093731 I bought that very one and it is super nice and way cheaper than the others out there. id post a pic but dont know how
December 03, 2018, 03:41 PM
WHOMPWHOMPLOKAR....
December 03, 2018, 08:39 PM
SP 124XI use the jegs 15238 and 55016. There might be cheaper options but I had the 55016 SLE extension from my old scoop tray mount.
December 04, 2018, 05:14 AM
Tony BarrettI just installed the Lokar. It is a high quality part. It even has holes pre drilled to mount an air solenoid for a TS/SLE.
December 04, 2018, 08:23 AM
NC3x58Don't know if the Goza is still around, but I used that one, with their extension. I also didn't use the posts, have a scoop hold down that bolts to carb center bolt. If you go with the Goza, get a tall cable mount and maybe even a aluminum block to help keep the cable angle down.
December 04, 2018, 08:49 AM
Mike FrizieCAN THE LOKAR PIECE BE USED JUST A CABLE , NO SLE?
December 04, 2018, 11:09 AM
Buck2248racingjunk and look at ad # 183093731 look at these they are just like the Lokar ones and only $160
December 04, 2018, 04:34 PM
CashflowThe Lokar can be used both ways but the one Mike posted looks very nice.
December 05, 2018, 05:30 AM
Tony BarrettYes the Lokar comes with 2 cable holders. One for a TS/SLE and one for just the cable.
December 05, 2018, 02:18 PM
Buck2248the one I was talking about he has the non sle bracket also.
December 19, 2018, 08:47 AM
00 DEAD ONquote:
Originally posted by WHOMPWHOMP:
LOKAR....
LOKAR is the best out there. JMO