anyone out there that can tell me "who"is making fiberglass dragster dashes and noses

Thanks

Rick Bailey

Riggeal's offers both. Noses are posted on the site and they emailed me dash specs

Comes in glass or carbon and blank or with the iq3 mount. I don't have the pricing anymore just the pic

I don't mean to hijack the thread but

I have a Racetech dragster and need a new nose.
It is a Riggeal but I was wondering if they are sold by Racetech with the holes precut and dimpled for the dzus buttons?


I can easily buy a nose and cut the holes but I don't know how they slightly dimple them without cracking the fiberglass.


Just have not gotten around to calling Racetech and asking....

Mine is Aluminum. Don't you have to use a 4 hole doubler plate on glass? I may be wrong, doesn't the taper fit in the drilled hole. I have a few that i use due to egged holes on the tin. When the lower rails snapped. He shows a dimple tool here.
(TM) Race cars.
https://www.youtube.com/watch?v=YY-Ldl15Cg0

Tapered reamer for glass i believe. Small one you put on a drill. Don't forget to tape it up where your going to drill.

This message has been edited. Last edited by: TD3550,