DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Torrington Bearing
Go
New
Find
Notify
Tools
Reply
  
Torrington Bearing
 Login/Join
 
DRR Trophy
posted
Looking for the press fit on a axial torrington as in rollerizing a rear drum on a Torqueflite trans. I don't believe it's much but I can't find the number anywhere. Thanks
 
Posts: 2 | Location: NJ | Registered: March 22, 2011Reply With QuoteReport This Post
DRR Pro
posted Hide Post
 
Posts: 1838 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I have the bearings. I am looking for the press clearance. What size the hole should be for the bearing fit. Like .001/.003 press fit. I don't think they should be to tight.
 
Posts: 2 | Location: NJ | Registered: March 22, 2011Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Size on size or interference of .0003 - .0008
 
Posts: 58 | Location: st louis mo | Registered: April 15, 2012Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Torrington Bearing

© DragRaceResults.com 2024