looking to replace the heads on my 40 year old street motor, had 64cc stock heads, whats the simplest aftermarket head below $1000, 202 valve, 64cc and prefer angle plug. can`t find any good used oem stuff. anyone used the summit heads or Promaxx brand,looking to bolt on with stock components, thanks!

Look at the options on this page. Chad won't sell you junk.

https://speierracingheads.com/...tek-sbc-as-cast.html

Rumors say Jegs heads are Profiler castings. I've seen many of them being used. I bought a pair of Promaxx but haven't used them yet. Others have used "white box" heads from Nickels Performance and they worked great.

quote:

Originally posted by CURTIS REED:
Look at the options on this page. Chad won't sell you junk.

https://speierracingheads.com/...tek-sbc-as-cast.html

DITTO! Very happy customer!

quote:

Originally posted by fast frank:
looking to replace the heads on my 40 year old street motor, had 64cc stock heads, whats the simplest aftermarket head below $1000, 202 valve, 64cc and prefer angle plug. can`t find any good used oem stuff. anyone used the summit heads or Promaxx brand,looking to bolt on with stock components, thanks!

Brodix Iron Killer. I am pretty sure (not 100%) that Summit and Promaxx heads are Brodix copies in the 200cc. I have also heard, as Eman stated, the Jegs are Profiler copies. ATK heads are made in the USA and are another option for a Profiler copy with stock exhaust location.

This message has been edited. Last edited by: the rain maker,

I have used the summit heads before. I will say the looked identical to a set of brodix ik200 heads I had at the time. I was very happy with them. I now have a set of promax 225cnc heads that for what I bought them for I don't think I could beat them.

There is a reason that Speier Racing Heads has so many nuthuggers. It's because when it comes to sbc heads, there may be nobody better. I don't know if his prices are within your budget. But he delivers a great value.

We have a set of brodix 200ik and a set of summit 200 they both work very well. Can't tell any difference in them.

thanks everyone

EQ heads (Engine Quest) - a new copy of GM Vortec Heads, but comes with screw-in studs, and can be ordered with the older valve cover bolt pattern and intake bolt pattern if you prefer. Believe they are cast in Australia or New Zealand. Got a new set assembled and shipped to my door for $800, with 64cc chambers. My engine guy said they were just about the nicest iron castings he had ever seen.

https://www.aamidwest.com/engi...heads/chevrolet-350/

You can do a search and read all about them, basically they were originally intended as a legal head for circle track racing in the midwest where rules require stock GM castings. They even come with a GM casting number and are legal in those racing series.

Thanks guys..

To be clear, the Jeg's and ATK are Pro-Filer castings. Same as you get just branded with their logo. ATK's do have a stock location exhaust port.

This car dipped in the 5's N/A in a handful of runs with a set of out of the box Brodix T 1's with a Bullet camshaft under 700 lift I bought from an old friend I knew from back when he was with Lunati. 23 degree 3.875 x 4.185 sbc 427 I bolted together in the back yard with some old parts I had laying around. Regular ****, although I did use shaft rockers on it. I think Brodix 23 sbc cylinder heads are way underrated.