September 09, 2023, 07:20 AM
racerdude2054Door car powder coat
What color would you powder coat a door car chassis?
For obvious reasons I won’t go with a candy color or anything like that.
Something that can be touched up if needed
Misty lava is essentially the direction I’m looking currently
Your thoughts?
September 09, 2023, 10:52 AM
WooleyWhatever you choose go with something that you know for sure you can get a spray on or brush on equivalent for the touch ups that will definitely come.
September 10, 2023, 06:59 PM
Bad NewsJust about any solid color can be matched up in Imron if you have a distributor close by.
Get 3 or 4 sample cards sprayed when you have the chassis done, then you will have a card to give the paint mixer to work from.
Stay away from too many different coats,maybe a primer and a topcoat. Powder is not like paint, keep it under 4-6 mils and properly cured it can be bulletproof. Thick powder and haphazard curing will make it brittle.
September 11, 2023, 10:03 AM
BD104XLight silver. Easy to touch up & neutral enough so it goes with any future repaints of the body.
September 11, 2023, 12:10 PM
Al AlguireDid my new truck in "millennial" gray. Same color on new Hondas
September 11, 2023, 01:57 PM
racerdude2054Thank you for the photos