Here's my REF headers I picked up today. We had our old set copied with some changes. Greg also fixed my blown-out tube on the old set.

The pics don't do them justice!

2BKING

Sweet

Greg does nice work!

Headers are going to Ram Pro Line in Las Vegas to be ceramic coated black. I didn't want to have them coated locally but the time frame I'm working with dictates.

2BKING

Very Nice. Were the O2 bungs placed on an angle for clearance??

Just wondering, does your car have a mid plate? If so do you have any pictures of how you got it to work with the right side header? That’s just one bump in the road on my 77 Camaro, so looking for ideas.

No plates, we have reinforced solid mounts after twisting the originals up. Plus, we added 2 struts from the frame to studs on the transmission bell housing on each side.

2BKING

quote:

Originally posted by markemark:
Very Nice. Were the O2 bungs placed on an angle for clearance??

Yes, the best place for the bungs was up top. The floorboards have pretty good clearance & are on angle. The driver's side has the most clearance, but I moved the bung forward a 1/2" from the old header. The passenger side is tighter & I moved the bung forward 1" from the old header.

I use the driver's side bung for my single O2 for now.

2BKING

I believe you posted that there was a way to use dual O2’s with Terminator. Can I assume this means that they both run together (in DA) but only one is used for the control?

quote:

Originally posted by markemark:
I believe you posted that there was a way to use dual O2’s with Terminator. Can I assume this means that they both run together (in DA) but only one is used for the control?

Yes, I did. I haven't watched the Joe Simpson Video yet, been busy & the 2nd O2 is not on my priority list right now.

2BKING

^^^^^^^^
https://www.youtube.com/watch?v=x2PInipNCdQ

I posted this in the other thread.

quote:

Originally posted by B KING:

quote:

Originally posted by markemark:
^^^^^^^Here’s Joes video of how to add a second O2 sensor in Holley ECU that uses only one. Perty cool! If one uses MSD Grid, the 7765 wide band O2 could be used in both Grid and Holley using this method.

O2 Sensor addition

I guess you have taken time to watch the video & looks like you approve!

2BKING

Dropped off the headers to be coated. They said them look like they came from Greg at REF. I asked how he knew, he said look at them; they speak for themselves & I agreed!

2BKING