Bracket Talk
Plugs with rust specs...need advice

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/7267068186

September 21, 2018, 09:15 PM
highstrung
Plugs with rust specs...need advice
Haven't raced the car in a little over 3 weeks and the last time I raced it ,the weather was pretty hot and very humid. Went through to pull the plugs tonight and I noticed that number in 3 and number 6 had a little bit of white on the inside and had some Rust specks. Also looked through spark plug holes and I could see a little bit of a rust ring on the exhaust valves of number 6 and number 8 on the top side not on the combustion side. Could this be condensation or could I have a head gasket leak somewhere any thoughts. I will post pictures as soon as I figure out how to.[URL= ]Plugs[/URL]

This message has been edited. Last edited by: highstrung,



September 22, 2018, 08:52 AM
Canted Valve
A leak down test might be in order.


Illegitimi non carborundum
September 22, 2018, 09:06 AM
TD3550
I experience the same issue with running Q16. Its a little more pronounced. It did the same thing running C14 also. No coolant problems either.My problem is the inside temp of the shop. Which is cool most of the time. I have dealt with this for years. Bore scope great little tool. Now when i put the car up for the season, I pull the plugs and spray some WD40 in the holes, spin it over and re plug it up. But like CV stated above, leak down first in order. I have a friend that has the same issue with the Q16 in his home garage. He puts the car back in when the motor is still warm. I will see it around the margin of the exhaust valves also.

This message has been edited. Last edited by: TD3550,
September 22, 2018, 07:01 PM
highstrung
Thanks...did do leak down...2--3%. Ran it today....seemed fine. Gonna pull plugs and and check water level. And yes...borescope might be added to toolbox soon. Thanks for the replies.