DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Unbelievable (video)
Go
New
Find
Notify
Tools
Reply
  
Unbelievable (video)
 Login/Join
 
DRR Pro
Picture of Goob
posted
Darndest thing I've ever seen.
Good channel, dude has some smarts.
And he has a long roof race car.

I think he found the exact resonant frequency to dissolve Aluminum. Interesting.

https://youtu.be/com9fTAr7eU


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1818 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of 434 olds
posted Hide Post
Old news





Worlds Quickest And Fastest 71 Cutlass On The Planet Earth
 
Posts: 536 | Location: Oak ridge, N.J | Registered: February 09, 2003Reply With QuoteReport This Post
DRR Pro
Picture of RacerVX54
posted Hide Post
Been waiting g for a recap on the rod issue


"Just Shut Up and Race"

Brian Martin
Martin Racing
5.50 126
 
Posts: 1421 | Location: Va.Beach .Va | Registered: August 03, 2005Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Converter slipping 45% in high gear when it came apart.

Interesting, very interesting.

BOOST!
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR S/Pro
Picture of banjo
posted Hide Post
Steve Morris did an interview on dragboss last night where that came up.

He said he had sent them out to be analyzed and it was a material issue, but the manufacture disagrees and stated that material and design was correct that he just exceeded the design and material.

Reading between the lines it sounds like the manufacturer didn't want to acknowledge it was there issue.

It was a good interview.

https://youtu.be/Zgf8Cpt8Cew


Bill Simpkins
74 Nova
SBC 406
3240 pounds
Speierracing heads

60 1.27 (10/16)
1/8 6.03@111 (10/16)
Best 9.87@131 on the rev limitor 1 Feb 2013


nova

quarterpanelview

wheelie

FTI Converter
www.speierracingheads.com

 
Posts: 1837 | Location: San Angelo | Registered: March 07, 2005Reply With QuoteReport This Post
DRR Pro
Picture of RacerVX54
posted Hide Post
quote:
Originally posted by banjo:
Steve Morris did an interview on dragboss last night where that came up.

He said he had sent them out to be analyzed and it was a material issue, but the manufacture disagrees and stated that material and design was correct that he just exceeded the design and material.

Reading between the lines it sounds like the manufacturer didn't want to acknowledge it was there issue.

It was a good interview.

https://youtu.be/Zgf8Cpt8Cew


Reguardless all 8 rods blew apart nothing left...craazy


"Just Shut Up and Race"

Brian Martin
Martin Racing
5.50 126
 
Posts: 1421 | Location: Va.Beach .Va | Registered: August 03, 2005Reply With QuoteReport This Post
DRR S/Pro
Picture of banjo
posted Hide Post
It's crazy to me that they all shattered
at the same time.


Bill Simpkins
74 Nova
SBC 406
3240 pounds
Speierracing heads

60 1.27 (10/16)
1/8 6.03@111 (10/16)
Best 9.87@131 on the rev limitor 1 Feb 2013


nova

quarterpanelview

wheelie

FTI Converter
www.speierracingheads.com

 
Posts: 1837 | Location: San Angelo | Registered: March 07, 2005Reply With QuoteReport This Post



DRR Pro
Picture of Alaskaracer
posted Hide Post
quote:
Originally posted by banjo:
Steve Morris did an interview on dragboss last night where that came up.

He said he had sent them out to be analyzed and it was a material issue, but the manufacture disagrees and stated that material and design was correct that he just exceeded the design and material.

Reading between the lines it sounds like the manufacturer didn't want to acknowledge it was there issue.

It was a good interview.

https://youtu.be/Zgf8Cpt8Cew



On their website they said they are running a new alloy or something like that, version 3 I think.....wonder why........

Steve wouldn't have tried them if he was told they weren't right for his application....Vader rods is just trying to save face when he advertised they were stronger than anything else out there and found out the hard way they were junk.


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1532 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of 434 olds
posted Hide Post
quote:



On their website they said they are running a new alloy or something like that, version 3 I think.....wonder why........



He tried them because his main supplier for rods were way out on delivery date.





Worlds Quickest And Fastest 71 Cutlass On The Planet Earth
 
Posts: 536 | Location: Oak ridge, N.J | Registered: February 09, 2003Reply With QuoteReport This Post
DRR Sportsman
Picture of Dave Koehler
posted Hide Post
quote:
Originally posted by Coloradoracer:
quote:
Originally posted by banjo:
Steve Morris did an interview on dragboss last night where that came up.

He said he had sent them out to be analyzed and it was a material issue, but the manufacture disagrees and stated that material and design was correct that he just exceeded the design and material.

Reading between the lines it sounds like the manufacturer didn't want to acknowledge it was there issue.

It was a good interview.

https://youtu.be/Zgf8Cpt8Cew



On their website they said they are running a new alloy or something like that, version 3 I think.....wonder why........

Steve wouldn't have tried them if he was told they weren't right for his application....Vader rods is just trying to save face when he advertised they were stronger than anything else out there and found out the hard way they were junk.


In one of his videos he stated that he purchased the disappearing rods because his normal source was considerably backed up and could not supply him on time.


Dave Koehler - Koehler Injection - http://www.koehlerinjection.com
Fuel Injection - Nitrous Charger - Nitrous Master Software - Balancing
99% of fuel injection problems are electric.
 
Posts: 361 | Location: Urbana, IL 61802 | Registered: December 03, 2003Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
Surprising that this didn't occur on the dyno or one of the previous runs it had made.
It had to be like the old Spintron videos of experimental valvetrain parts vaporizing.


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1818 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
At 5:44 to the right of his fingers is a proximity sensor, what would that be used for?
 
Posts: 41 | Location: Work | Registered: April 27, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of sr4440
posted Hide Post
quote:
Originally posted by FastFreddy:
At 5:44 to the right of his fingers is a proximity sensor, what would that be used for?


It's used to control wheelies, if the distance exceeds "X" then timing is pulled, as "x" increases, more timing is pulled.

Joe


Without data, you’re just another guy with an opinion.
 
Posts: 1313 | Location: TEXAS | Registered: February 07, 2003Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Unbelievable (video)

© DragRaceResults.com 2024